Teknion Sanna Lightbar Installation Manuals Download

Page: 1 / 5

NOTE 1: For further information on
optimizing the Cerebro assets, please refer
to the Teknion Navigate User Guide .

NOTE 2: Do NOT remove Bumper Strip

from Light Head util AFTER the Light is
fully assembled

A -Lightbar x1

B - Stem x1

C - Cable Clips x1

Top Clamp

D - Desk Edge Clamp x1

Bottom Clamp

E - Bumper Strip x1

Sanna Lightbar Desk Edge Mount (YLSC)

Part and Product Identification

- Part name

part quantity

Section:
Description:

Page No:

Date:

Rev. No: 01

Sanna Lightbar - Desk Edge Mount for IC (YLSC)

Cerebro

Sep 2019

1 of 5

COM_603b

complements

Installation Guides

Summary of Contents for Sanna Lightbar

Page 2: ...face STEP 1 Slide the Bottom Edge Clamp onto the Top Edge Clamp Undo the Clamping Knob to make room for desk edge Section Description Page No Date SSEMBLE DESK EDGE CLAMP MOUNTING ON DESK EDGE DIS_603b 2 of 5 Sep 2019 Electrics for IC Cerebro complements Installation Guides ...

Page 4: ...t the Cable into the Cable Clips STEP 5 Open the Lightbar to the side Install Lightbar to the Stem by pressing GENTLY as shown above NOTE Remove Bumper Strip E after Lightbar is installed Section Description Page No Date INSTALL LIGHTBAR CABLE MANAGEMENT DIS_603b 4 of 5 Sep 2019 Electrics for IC Cerebro complements Installation Guides ...

Page 5: ...ly 4 Turn Connector 90 degrees to lock 5 To remove plug slide plug out Connector Lock Section Description Page No Date POWER SUPPLY INFORMATION Sep 2019 5 of 5 DIS_603b Electrics for IC Cerebro complements Installation Guides STEP 7 Insert Connector Lock into the Power Lock Supply then turn it counter clock wise to lock it in place ...