Nova DVR 2024
– 2015 version
Changes to the 2015 version:
The Nova DVR 2024 Lathe has been updated with a new keypad and interface to give the
user instant access to the preset speeds #1 - #10.
New keypad
Key
Name
Short description
F1
- Preset Speed 1 Key -
Set speed to “Preset speed #1”
F2
- Preset Speed 2 Key -
Set speed to “Preset speed #2D”
F3
- Preset Speed 3 Key -
Set speed to “Preset speed #3”
F4
- Preset Speed 4 Key -
Set speed to “Preset speed #4”
F5
- Preset Speed 5 Key -
Set speed to “Preset speed #5”
Hold “Mode” + F1
- Preset Speed 6 Key -
Set speed to “Preset speed #6”
Hold “Mode” + F2
- Preset Speed 7 Key -
Set speed to “Preset speed #7”
Hold “Mode” + F3
- Preset Speed 8 Key -
Set speed to “Preset speed #8”
Hold “Mode” + F4
- Preset Speed 9 Key -
Set speed to “Preset speed #9”
Hold “Mode” + F5
- Preset Speed 10 Key -
Set speed to “Preset speed #10”
Changing line in the menu
In the 2015 version of the 2024
, the menu line can be changed by pressing the “
Fwd / Rev
”
key.
Note:
Previously, the user had to hold “
Fwd/Rev
” and press “
UP RPM
” or “
DOWN RPM
” key
to change the line.
