PICO-NYMPH-IMX6
Quickstart Guide
INNOVATORS OF TECHNOLOGY
2
Dimensions
1
Safety Precautions
Thank you for purchasing a TechNexion PICO series pre-assembled evaluation kit based on NXP i.MX6 applications
processor. This installation guide will be helpful in the installation, wiring and inspection of your TechNexion
evaluation kit. Before using the product, please read this guide to ensure correct use. You should thoroughly
understand all safety precautions before proceeding with the installation, wiring, and operation. Place this
instruction sheet in a safe location for future reference.
• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will
corrode electronic circuits. If your device does get wet, allow it to dry completely.
• Do not use or store the device in dusty or dirty areas. Its parts and electronic components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form
inside the device and damage electronic circuit boards.
• Do not attempt to open the device.This product needs to be installed by qualified personnel.
• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.
• Do not paint the device. Paint can clog the parts and prevent proper operation.
• Unauthorized modifications or attachments could damage the device and may violate regulations governing radio
devices.
•Do not touch any internal or exposed parts of the device as electrical shock may result.
•Do not open the device while power is on. Otherwise electrical shock may result.
•Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
•Be sure the ventilation holes are not obstructed during operation. Otherwise malfunction may result due to bad
ventilation or overheating.
These suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not
working properly, take it to the nearest authorized service facility for service.
• Make sure that the available power source matches the required input power of the device. Failure to observe
this caution may result in electric shock or fire.
1.1
Storage and Installation
1.2
Wiring
1.3
Maintenance and Inspection
!
Unit : mm
1
2
104
34.8
90.02
80.92
36.9
34.8
36.9
