![background image](http://html1.mh-extra.com/html/tecc/titus-nano/titus-nano_user-manual_829012001.webp)
USER GUIDE
BATTERY OPERATION:
Power on and off: Press the power button 5 times in quick succession, the power
button light will flash 5 times to indicate Titus Nano is ready for use. to turn off, press
the power button 5 times in quick succession.
Vaping: Press the power button as you inhale, release the button when you stop
inhaling. When the power button is held down, the light will be on.
CHARGING:
The battery can be recharged using the supplied USB cable plugged into a dedicated
USB port or wall adaptor. The power button light will flash white 5 times and illuminate
red until charging is complete.
BATTERY DISPLAY FUNCTION:
The power button light illuminates whilst being pressed, and on release flashes at
increased frequency as the battery becomes discharged.
Battery charge remaining
60%-100%
Stays lit for 6 seconds
30%-59%
Slowly flashes for 6 seconds
10%-29%
Moderately flashes for 6 seconds
0-9%
Flashes repeatedly for 6 seconds
TO FILL THE TANK:
• Invert the complete device and unscrew the battery from the tank.
• Fill the tank up to but not beyond the level of the central tube taking care to avoid
liquid entering the central tube.
• Attach the battery to the inverted tank.
ATOMIZER HEAD REPLACEMENT:
• Invert the complete device and unscrew the battery from the tank.
• Unscrew the atomizer head and remove from the integrated battery base.
• Screw the new CL atomizer head into place and firmly tighten.
• Refit the battery to the inverted tank.
ADJUSTING ATOMIZER AIRFLOW
Rotate the ring on the atomizer base to cover/reveal the airflow holes to increase/
decrease the airflow to the atomizer.
TECC_Titus_Nano_Manual.indd 1
03/01/2017 23:06