Task Force AP-PW1450-ZE01 Operating Instructions Manual Download

Page: 1 / 16

TASK FORCE

PW1450-ZE01_12/2006_REV.1

PLEASE KEEP THE ORIGINAL BOX, PACKAGING AND RECEIPT.

WARRANTY REGISTRATION BY INTERNET, WWW.ACTIVEPRODUCTS.COM.

www.activeproducts.com / 1-866-990-9918

QUESTIONS, PROBLEMS, MISSING PARTS?

Before returning to your retailer, visit our website or call our customer service at

PURCHASE DATE: _______________ SERIAL#: ___________________________________

CAUTION !

BEFORE OPERATING THIS UNIT, PLEASE READ THIS MANUAL THOROUGHLY

AND RETAIN IT FOR FUTURE REFERENCE.

IF YOU MUST STORE YOUR PRESSURE WASHER IN A PLACE WHERE TEMPERATURE IS

BELOW 41ºF (5ºC), YOU MUST APPLY WINTERIZING PROCEDURE TO PROTECT IT. FAILURE

TO WINTERIZE THE UNIT MAY PERMANENTLY DAMAGE PUMP AND VOID THE WARRANTY.

SEE PAGE 10 FOR WINTERIZING PROCEDURE.

1450PSI

ELECTRIC PRESSURE WASHER

ITEM: 248901
MODEL NO.: AP-PW1450-ZE01

Summary of Contents for AP-PW1450-ZE01

















Search results

Summary of Contents for AP-PW1450-ZE01

Reviews:

Related manuals for AP-PW1450-ZE01

Brands by name

Popular brands

Task Force AP-PW1450-ZE01, Operating Instructions Manual

Search results

Summary of Contents for AP-PW1450-ZE01

Reviews:

Related manuals for AP-PW1450-ZE01

Brands by name

Popular brands