background image

©Copyright Task Force Tips LLC 2010-2021

1

LIU-330 February 15, 2021 Rev09

TASK FORCE TIPS LLC

MADE IN USA · tft.com 

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 · 219-462-6161 · Fax 219-464-7155

G-Force

INSTRUCTION FOR INSTALLATION, OPERATION, AND MAINTENANCE

EDUCTOR 

125 SERIES IN-LINE

DANGER

Understand manual before use. Operation of this device without understanding the manual and

receiving proper training is a misuse of this equipment. Obtain safety information at tft.com/

serial-number. 
This equipment is intended for use by trained and qualified emergency services personnel for

firefighting. All personnel using this equipment shall have completed a course of education

approved by the Authority Having Jurisdiction (AHJ).
This instruction manual is intended to familiarize firefighters and maintenance personnel with the

operation, servicing, and safety procedures associated with this product. This manual should be

kept available to all operating and maintenance personnel. 

Inlet Pressure:
200 psi (13.8 bar)
160 psi (11 bar)
145 psi (10 bar)

Maximum 
Back Pressure:
130 psi (9 bar)
100 psi (6.9 bar)
95 psi (6.5 bar)

Concentration Settings:
OFF, 1/4%, 1/2%, 1%, 3%, 6%

Models:
60 gpm (225 L/min)
95 gpm (263 L/min)
120 gpm (450 L/min)
125 gpm (475 L/min)

Summary of Contents for EDUCTOR 125 Series

















Reviews: