background image

»

MD-301@#

MINIDISC DECK

3D0024910A

ESP

AÑOL

IT

ALIANO

DEUTSCH

FRANÇAIS

ENGLISH

This appliance has a serial number located
on the rear panel. Please record the model
number and serial number and retain them
for your records.
Model number
Serial number

WARNING: TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE THIS 
APPLIANCE TO RAIN OR MOISTURE.

The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying  the  appliance.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert 
the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure 
that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Ü

ÿ
Ÿ

OWNER'S MANUAL / MANUEL DU PROPRIETAIRE

BEDIENUNGSANLEITUNG / MANUALE DI ISTRUZIONI

MANUAL DEL USUARIO / GEBRUIKSAANWIJZING

Summary of Contents for MD-301mkII
























Reviews: