background image

Package Contents

USER GUIDE

QUICK START GUIDE

1

3

4

 TaoTronics True Wireless Stereo Earbuds (TT-BH095)

w!

1 x USB-C Charging Cable

 1 x User Guide

 1 x Quick Start Guide

Product Diagram

1

3

2

 Charging Slot

 Charging Indicator

 USB-C Charging Port

 Charging Case

 Reset Button 

Important Safety Instructions

Please read the instructions thoroughly before using this product and retain it for 
future reference.

• Do not wear earbuds with high volume for a long time to avoid damaging 
   your hearing.
• Set the earbuds to low volume before you put them on, then increase the 
   volume gradually as per your preference.
• Do not set volume too high to stay aware of your surroundings.
• Please refer to local laws and regulations if you want to answer phone calls via 
  this device during driving.
• For your safety, avoid distraction from music or phone calls when you are 
  driving or doing other activities with potential dangers.

Hearing Safety

Warning: 

Please set the volume to proper level to avoid hearing

damages.

• Do not expose this product to high temperatures.
• Do not immerse the earbuds into water or expose them to humidity for a 
  long time. 
• Do not clean the product with detergent containing alcohol, ammonia, 
  benzene or abrasives.
• Avoid dropping.
• Place the earbuds back into the charging case when not in use and keep it 
  away from children and pets to avoid choking hazard.
• Unauthorized disassembly of any parts of this product is forbidden, which may 
  cause fire hazard, warranty voidance, and/or property loss.
• Close attention is needed when using near children.
• Keep the charging case away from water, rain or any other liquid.
• Don’t use the product in thunderstorm to avoid malfunction or electric shock.
• Always ask a professional technician or authorized personnel for repair.

Caution

This product contains lithium battery. Never expose it to excessive 
heat such as direct sunlight or fire to avoid explosion.

Wear Your Earbuds

Please wear the earbuds as shown below.

Pictures only 

for reference. 

Using Your Earbuds

Charging

Bluetooth Caution

• When the device is connected wirelessly to another device, place 
  the two devices close to each other to achieve their normal 
  functionalities and avoid possible signal interference.
• When using a wireless connection, make sure there are no 
  obstacles between the two devices. Obstacles including walls and 
  fences may shorten the effective range.
• The maximum effective Bluetooth range may vary with the 
  environmental circumstances.

1. Put the earbuds into the charging case as per the L (left) and R (right) marks.
2. Cover the lid and charging will start automatically.

Charging the Earbuds

Charging the Charging Case

L

R

Note: 

• Please fully charge the earbuds when using them for the first time.
• When battery is low, a “Battery low” voice prompt will be heard 
  (if you are wearing the earbuds). Please charge in time or the 
  earbuds will turn off automatically around 10 minutes later.
• Charge the earbuds at least once every 3 months when not using 
  for a long time.

1. Connect the charging port with any USB charging adapter or active 
    computer USB port.
2. The charging indicator will stay solid white, and turn off once fully charged.

Power On

Uncover the lid and they will power on automatically.

Note: 

• Unplug the charging cable (timely) when fully charged.

• You can use one earbud or both earbuds as per your preference. Please refer to 
  the corresponding pairing instructions. 
• Before pairing, please turn off other Bluetooth devices and place the device to 
  be connected close to the earbuds.
• When the earbuds are disconnected from your device for more than 10 minutes, 
  they will turn off automatically.

Pairing

Power Off

Put the earbuds into the charging case and close the lid, they will turn 
off automatically.

1. Uncover the lid to turn on the earbuds, they will connect with each other 
    automatically. The LED indicator on the charging case will flash blue and white   
    alternately indicating the earbuds are in pairing mode now.
2. Turn on the Bluetooth function on your device and search for nearby devices. 
    Find “TAOTRONICS SoundLiberty 95 L” in the searching results, tap on the 
    name to connect.
3. Once connected, the LED indicator on the charging case will flash blue slowly.

Couple Earbuds Mode

Note

• The earbuds can remember the devices paired previously, and 
  will attempt to pair with the last connected device for the first 20 
  seconds. If re-pairing failed in 20 seconds, the earbuds will enter 
  pairing mode.
• It is not recommended to wear the two earbuds on different people. If 
  necessary, please keep the two earbuds close to each other in couple
  earbuds mode.

Model: TT-BH095

TaoTronics SoundLiberty 95

True Wireless Stereo Earbuds

User Guide

4

L

R

2

 Microphone

 Multifunction Touch Control

 Charging Contacts

 Microphone

 LED Indicator 

L

R

10

9

8

7

5

6

Bottom

Summary of Contents for SoundLiberty 95























Reviews: