To Connect Barcode Scanner Module
T9i
OPERATION GUIDE
The Barcode Scanner is preinstalled as an option for the T9i series.
The default scanner trigger button is on the right side. To assign the Scanner Trigger
button, follow the steps below.
1. Start Button Manager by clicking on
in the system tray.
2. Select an available unused button marked with the icon
.
3. Click on
to go to the second screen of Button Manager.
4. Click on the
icon to assign the Scanner Trigger to the unused button.
5. Click OK to apply configuration settings and close the window.
Button Management
To connect the Barcode Scanner, you can use the Keyboard Wedge. Tap on the
icon in the
task bar, a menu displays as shown in the picture below. Select Connect Scanner.
Mobile POS Tablet Barcode Scanner
Installation
