![background image](http://html.mh-extra.com/html/talon-tools/aea002/aea002_user-manual_815615001.webp)
1
GENERAL SAFETY RULES
GB
WARNING!
When using gas tools, basic safety precautions, including the following, should always be followed to reduce
the risk of serious personal injury and/or damage to the unit.
Read all these instructions before operating this product and save these instructions.
WARNING • PLEASE READ
For your own safety please read this manual before attempting to operate your new unit. Failure to follow instructions
can result in serious personal injury. Spend a few moments to familiarize yourself with your trimmer before each use.
MODEL NO. AEA002
SAFETY
OPERATION
MAINTENANCE
Edger Attachment
USER MANUAL
Meaning of symbols marked on the product
Read the user manual before using the machine
Wear safety goggles to protect your eyes
Wear ear protection to protect against noise
Wear dust mask to protect against dust
Wear gloves to protect your hands
Wear safety boots to protect against electric shock
READ YOUR USER MANUAL AND ALL SUPPLE-
MENTS (IF ANY ENCLOSED) THOROUGHLY BEFORE
OPERATING YOUR UNIT.
1.
Wear close fitting, tough work clothing
that will
provide protection, such as long slacks or trousers,
safety work shoes, heavy duty work gloves, hard hat,
a safety face shield, or safety glasses for eye protec-
tion and a good grade of ear plugs or other sound
barriers for hearing protection.
2.
Store in a safe place.
Open fuel cap slowly to release
any pressure which may have formed in fuel tank. To
prevent a fire hazard, move at least 10 feet (3 meters)
from fuelling area before starting.
3.
Turn unit off
before setting it down.
4.
Always hold unit firmly with both hands,
the
thumb and fingers encircling the handles.
5.
Keep all screws and fasteners tight.
Never operate
your equipment when it is improperly adjusted or not
completely and securely assembled.
6.
Keep handles dry,
clean and free of fuel mixture.
7.
Keep stringhead as close to ground as practical.
Avoid hitting small objects with stringhead. When cut-
ting on a slope, stand below stringhead. NEVER cut
or trim on a hill or slope, etc. if there is the slightest
chance of slipping, sliding or losing firm footing.
8.
Check area you will be trimming for debris
that
may be struck or thrown during operation.
9.
Keep all parts of your body and clothing away
from stringhead
when starting or running engine.
Before starting engine, make sure stringhead will not
come in contact with any obstacle.
10.
Stop engine
before examining cutting line.
11.
Store equipment away from possible flammable
materials,
such as gas-powered water heaters,
clothes dryers, or oil-fired furnaces, portable
heaters, etc.
12.
Always keep
the debris shield, stringhead, and
engine free of debris build-up.
13.
Operation of equipment
should always be restricted
to mature and properly instructed individuals.
WARNING:
Gasoline is highly flammable, and its vapours
can explode if ignited. Take the following precautions:
1. Store fuel only in containers specifically designed and
approved for the storage of such materials.
2. Always stop the engine and allow it to cool before fill-
ing the fuel tank. Never remove the cap of the fuel
tank, or add fuel, when the engine is hot. Never oper-
ate the unit without the fuel cap securely in place.
Loosen the fuel tank cap slowly to relieve any pressure
in the tank.
3. Mix and add fuel in clean, well-ventilated area out-
doors where there are no sparks or flames. Slowly
remove the fuel cap only after stopping engine. Do not
smoke while fuelling or mixing fuel. Wipe up any spilled
fuel from the unit immediately.
4. Avoid creating a source of ignition for spilled fuel. Do
not start the engine until fuel vapours dissipate.
5. Move the unit at least 10 feet (3m) from the fuelling
source and site before starting the engine. Do not
smoke, keep sparks and open flames from the area
while adding fuel or operating the unit.
6. Never start or run the unit inside a closed room or
building. Breathing exhaust fumes can kill. Operate
this unit only in a well ventilated area outdoors.
1.
WARNING:
To reduce the risk of electrical shock, use
only extension cords approved for outdoor use.
2.
CORDS SETS:
Make sure your cord set is in good
condition. When using a cord set, be sure to use a cord
that is heavy enough to carry the current that your unit
will draw. An undersized cord set will cause a drop in
line voltage resulting in loss of power and overheating.
See the operator’s manual for the unit that will power
this attachment for the recommended cord size.
3. Inspect all extension cords and the unit power connec-
tion periodically. Look closely for deterioration, cuts or
cracks in the insulation. Also inspect the connections
for damage. Replace the cords if any defects or dam-
age appear.
4. Avoid creating a source of ignition for spilled fuel. Do
not start the engine until fuel vapours dissipate.
5. Do not use the unit in the rain.
6. Do not handle the plug or unit with wet hands or stand-
ing on any wet surfaces.
7. Do not leave the unit plugged in when not in use,
changing attachments or add-ons, or while being serv-
iced.
WARNING:
Keep children, bystanders, and
animals 50 feet (15 meters) away. If
approached stop unit immediately.
SAFETY WARNINGS FOR GAS EDGERS
SAFETY WARNINGS FOR ELECTRIC EDGERS