background image

AB-0091 AB-0092

TAKARA BELMONT Barber Chair

  

1 - 2

Notes for Use 

2 - 3

Notes for Use with Upholstery 4

Name of Components  4 - 5

How to Use

Safety Precautions 

(Be sure to observe the instructions)

Care and Maintenance 

11

Daily Inspection 

12

Daily Inspection Procedure 12

Specifications 

13 - 14

Standard Period of Use 

15

When Disposing of This Product 15

Legacy 91 Barber Chair

Legacy 92 Barber Chair

Model No.

Operating Manual

Please contact us in case your operation manual is 

unreadable such as being soiled or ripped, or is lost.

Thank you for purchasing TAKARA BELMONT product.

Please read through this manual 

carefully before installing or using 

the product to ensure correct use.

Failure to read the operating manual may lead to 

accidents.

This product is designed for commercial use at barbers 

or beauty salons and should be used in combination 

with an upper seat unit. Do not use this product for the 

purposes other than the practices and services in these 

places.

Keep this operation manual in a safe place for your 

future reference.

Table of Contents

Adjusting the Headrest............................6
For back shampoo and haircut ..............7
Using the Heelrest (AB-0091) ............... 7
Reclining/Raising the Backrest .............8
Using the Cape Holder ............................9
Using the Dryer Holder..........................10
Using the Manicure Holder....................10

Summary of Contents for Legacy 91





















Reviews: