DUOLINKS SW24 SERIES
Quick Start Guide
For advanced setup please refer to your User Guide on the CD-ROM for more detailed information.
Setup Procedure
Step 1:
Connect your Duolinks SW24 Series router
1. First, verify that your Duolinks SW24 Series router and your cable or DSL modems are powered OFF.
2. Using Ethernet cables connect your Broadband modems to the Duolinks SW24 Series router’s WAN
ports on the back panel.
3. Connect the Ethernet cables from PCs to the LAN ports of your Duolinks SW24 Series router.
Any LAN port on the Duolinks SW24 Series router will automatically act as an «Uplink» port when
connected to another Ethernet Switch or Hub.
4. Power ON the modems and wait for synchronization (approx. 30 seconds).
5. Plug in the power adapter of the Duolinks SW24 Series router to an electrical outlet and insert the
power cord into the DC 5V input on the back panel. Immediately the Power LED of your router will light
up.
6. The corresponding WAN – Link/ACT LED will be ON if the WAN port is correctly connected to a
Broadband modem.
7. For each PC connected to the LAN ports, the corresponding LAN – Link/ACT LED will be ON.
