POLY PERFORMANCE MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397
INSTALLATION INSTRUCTIONS
PPM-4018 JEEP JK COMPRESSOR MOUNT KIT
GENERAL NOTES:
•
These instructions are also available on our website at
www.synergysuspension.com
Check the website for any updated
instructions and additional photos for reference.
Installation time 20 minutes to 1 hour.
Kit contents: (1) Compressor Bracket
Required Tools:
- 13mm Wrench (preferably a ratcheting wrench)
- 10mm Wrench
- Philips Head Screw Driver
*** Prior to mounting a 400H or 450 Series Viair compressor, perform the supplemental install procedure
on page 3.
1.
Using fasteners supplied with your compressor, mount the compressor on the bracket, as indicated in
the following pictures – (for 450 series compressors – do not install the driver’s side rear fasteners,
until the bracket is installed in the engine compartment).
