www.swissphone.com
s.QUAD Bluetooth Tips
Introduction
In most cases, connecting s.QUAD to smartphones or tablets work right away.
Sometimes however a connection setup will not work immediately. This document
will guide you in these cases, helping to enable the connection. Please let us know
if this document was helpful for you, or not and which areas of the documentation
should be improved. We are looking forward to receiving your feedback!
Setup Connection
Please follow the sequence outlined in the flow below. In case you reach a
rectangle with «bars» on the sides, please jump to the corresponding chapter
inside this document.
After following this flow, hopefully you have successfully connected your
Smartphone and s.QUAD. Now you can read out and change some settings using
the s.QUAD App (in as far as allowed using PSWplus). More on this in the
following chapter.
Change s.QUAD Settings using the App
Once s.QUAD is connected to a smartphone, please open the s.QUAD App. After a
quick time the button at the bottom of the app will turn blue. Now you can read the
current settings from s.QUAD.
Connecting
s.QUAD to
Smartphones
Change Settings
Flow
