Pipe centres left to right
=
Pipe centres from wall
=
Depth from wall
=
Single
Double
width less 84mm
width less 84mm
55mm-65mm
67mm-77mm
79mm-89mm
79mm-89mm
Drawings
1. Unpack & Inspect
This product should have reached you in perfect condition. Please carefully unpack and inspect this radiator and all fittings. Your point of
purchase must be notified of any shortages or damage within 28 days of delivery. For further information please see terms and conditions
on reverse.
supplies4heat.co.uk 01342 306880
Steel Radiator
70mm Flat Tube, 35mm Round Collectors
Please read these instructions and terms and conditions carefully
prior to installation. Failure to do so may invalidate the warranty.
BEAUFORT
Slim
Fitting Instructions
BEAU_SL_1.0
Unpack & Inspect
1
You should have:
• 1 Radiator
• 4 Wall brackets (3 wall brac. for single 2 elements)
• 4 Wall Plugs (3 wall plugs for single 2 elements)
• 4 Screws (3 wall screws single 2 elements)
• 4 Wall sleeves (3 wall sleeves for single 2 elements)
• 1 Airvent
• 1 Blanking Plug
You will need:
• Tape measure
• Electric drill and bits
• Spirit level
Contents
Mark and Fix Brackets
3
Diagrams of Water Lily
The Radiator Company prides itself on selecting products from
manufacturers who exercise tight quality control measures. We only
select models with excellent standards of welding and brazing, as
well as high quality finishes. All of our products are well packaged
and should reach you in perfect condition. Just in case however, we
offer a minimum 10 year no quibble guarantee
for all radiators and towel rails.
Please carefully unpack and inspect this radiator
and all fittings. The Radiator Company must be
notified of any shortages or damage within 28
days of delivery. For further information please
see terms and conditions on back page.
Water Lily single radiators use clamp style brackets that can be
positioned on the collector to suit the installation, although we
recommend that they are fitted in the locations suggested in the
technical drawings in section 5. The brackets on double radiators use
welded lugs in fixed positions on the cross tubes.
Attach brackets and bracket sleeves to the radiator as shown in
Diagrams 1 (single) and 2 (double), place radiator against the wall
and mark bracket positions.
Detach the bracket sleeve from the bracket and using a suitable drill
bit and fixings secure in position, checking they are level and square.
Pipe Centres
Pipe centres left to right
=
width - 84 mm
Pipe centres from wall
=
Single;
55 mm - 65 mm
Double;
67 mm - 77 mm
Depth from wall
=
Single;
79 mm - 89 mm
Double;
91mm - 101mm
Please note: underneath connections only
Commision
Please Note: In accordance with Part L1 2006 of the Building Regulations
and BS7593:1992 code of practice for the treatment of hot water and central
heating systems, we strongly recommend flushing the heating system post
installation of new radiators and then adding the correct quantity and type
of inhibitor for use with your radiator and system to prevent corrosion.
Damage caused to systems not protected by a suitable inhibitor will not be
covered by manufacturer’s guarantee.
= typical bracket fixing positions for single range
5
Fix Brackets and Hang
With the bracket sleeves firmly fixed and level, the radiator can
be hung in position by inserting the brackets into the sleeves and
securing with the grub screws provided.
Hang Radiator
4
PLEASE NOTE :
It is essential that all brackets are level to ensure a vertical alignment for
connecting the pipework.
single range
double range
79÷89
55÷65
L’
L
H’
H
91÷101
67÷77
Model
Elem.
H
H’
H
H’
L
L’
N°
mm
mm
mm
mm
mm
mm
Water Lily
Single
& double
2
1820
1762
2020
1962
160
76
3
1820
1762
2020
1962
236
152
4
1820
1762
2020
1962
312
228
5
1820
1762
2020
1962
388
304
6
1820
1762
2020
1962
464
380
= bracket fixing positions for double range
2
Diagram 1 (single version)
Diagram 2 (double version)
Unpack & Inspect
1
You should have:
• 1 Radiator
• 4 Wall brackets (3 wall brac. for single 2 elements)
• 4 Wall Plugs (3 wall plugs for single 2 elements)
• 4 Screws (3 wall screws single 2 elements)
• 4 Wall sleeves (3 wall sleeves for single 2 elements)
• 1 Airvent
• 1 Blanking Plug
You will need:
• Tape measure
• Electric drill and bits
• Spirit level
Contents
Mark and Fix Brackets
3
Diagrams of Water Lily
The Radiator Company prides itself on selecting products from
manufacturers who exercise tight quality control measures. We only
select models with excellent standards of welding and brazing, as
well as high quality finishes. All of our products are well packaged
and should reach you in perfect condition. Just in case however, we
offer a minimum 10 year no quibble guarantee
for all radiators and towel rails.
Please carefully unpack and inspect this radiator
and all fittings. The Radiator Company must be
notified of any shortages or damage within 28
days of delivery. For further information please
see terms and conditions on back page.
Water Lily single radiators use clamp style brackets that can be
positioned on the collector to suit the installation, although we
recommend that they are fitted in the locations suggested in the
technical drawings in section 5. The brackets on double radiators use
welded lugs in fixed positions on the cross tubes.
Attach brackets and bracket sleeves to the radiator as shown in
Diagrams 1 (single) and 2 (double), place radiator against the wall
and mark bracket positions.
Detach the bracket sleeve from the bracket and using a suitable drill
bit and fixings secure in position, checking they are level and square.
Pipe Centres
Pipe centres left to right
=
width - 84 mm
Pipe centres from wall
=
Single;
55 mm - 65 mm
Double;
67 mm - 77 mm
Depth from wall
=
Single;
79 mm - 89 mm
Double;
91mm - 101mm
Please note: underneath connections only
Commision
Please Note: In accordance with Part L1 2006 of the Building Regulations
and BS7593:1992 code of practice for the treatment of hot water and central
heating systems, we strongly recommend flushing the heating system post
installation of new radiators and then adding the correct quantity and type
of inhibitor for use with your radiator and system to prevent corrosion.
Damage caused to systems not protected by a suitable inhibitor will not be
covered by manufacturer’s guarantee.
= typical bracket fixing positions for single range
5
Fix Brackets and Hang
With the bracket sleeves firmly fixed and level, the radiator can
be hung in position by inserting the brackets into the sleeves and
securing with the grub screws provided.
Hang Radiator
4
PLEASE NOTE :
It is essential that all brackets are level to ensure a vertical alignment for
connecting the pipework.
single range
double range
79÷89
55÷65
L’
L
H’
H
91÷101
67÷77
Model
Elem.
H
H’
H
H’
L
L’
N°
mm
mm
mm
mm
mm
mm
Water Lily
Single
& double
2
1820
1762
2020
1962
160
76
3
1820
1762
2020
1962
236
152
4
1820
1762
2020
1962
312
228
5
1820
1762
2020
1962
388
304
6
1820
1762
2020
1962
464
380
= bracket fixing positions for double range
2
Diagram 1 (single version)
Diagram 2 (double version)
Unpack & Inspect
1
You should have:
• 1 Radiator
• 4 Wall brackets (3 wall brac. for single 2 elements)
• 4 Wall Plugs (3 wall plugs for single 2 elements)
• 4 Screws (3 wall screws single 2 elements)
• 4 Wall sleeves (3 wall sleeves for single 2 elements)
• 1 Airvent
• 1 Blanking Plug
You will need:
• Tape measure
• Electric drill and bits
• Spirit level
Contents
Mark and Fix Brackets
3
Diagrams of Water Lily
The Radiator Company prides itself on selecting products from
manufacturers who exercise tight quality control measures. We only
select models with excellent standards of welding and brazing, as
well as high quality finishes. All of our products are well packaged
and should reach you in perfect condition. Just in case however, we
offer a minimum 10 year no quibble guarantee
for all radiators and towel rails.
Please carefully unpack and inspect this radiator
and all fittings. The Radiator Company must be
notified of any shortages or damage within 28
days of delivery. For further information please
see terms and conditions on back page.
Water Lily single radiators use clamp style brackets that can be
positioned on the collector to suit the installation, although we
recommend that they are fitted in the locations suggested in the
technical drawings in section 5. The brackets on double radiators use
welded lugs in fixed positions on the cross tubes.
Attach brackets and bracket sleeves to the radiator as shown in
Diagrams 1 (single) and 2 (double), place radiator against the wall
and mark bracket positions.
Detach the bracket sleeve from the bracket and using a suitable drill
bit and fixings secure in position, checking they are level and square.
Pipe Centres
Pipe centres left to right
=
width - 84 mm
Pipe centres from wall
=
Single;
55 mm - 65 mm
Double;
67 mm - 77 mm
Depth from wall
=
Single;
79 mm - 89 mm
Double;
91mm - 101mm
Please note: underneath connections only
Commision
Please Note: In accordance with Part L1 2006 of the Building Regulations
and BS7593:1992 code of practice for the treatment of hot water and central
heating systems, we strongly recommend flushing the heating system post
installation of new radiators and then adding the correct quantity and type
of inhibitor for use with your radiator and system to prevent corrosion.
Damage caused to systems not protected by a suitable inhibitor will not be
covered by manufacturer’s guarantee.
= typical bracket fixing positions for single range
5
Fix Brackets and Hang
With the bracket sleeves firmly fixed and level, the radiator can
be hung in position by inserting the brackets into the sleeves and
securing with the grub screws provided.
Hang Radiator
4
PLEASE NOTE :
It is essential that all brackets are level to ensure a vertical alignment for
connecting the pipework.
single range
double range
79÷89
55÷65
L’
L
H’
H
91÷101
67÷77
Model
Elem.
H
H’
H
H’
L
L’
N°
mm
mm
mm
mm
mm
mm
Water Lily
Single
& double
2
1820
1762
2020
1962
160
76
3
1820
1762
2020
1962
236
152
4
1820
1762
2020
1962
312
228
5
1820
1762
2020
1962
388
304
6
1820
1762
2020
1962
464
380
= bracket fixing positions for double range
2
Diagram 1 (single version)
Diagram 2 (double version)
Beaufort Slim
Single & Double
Beaufort Slim Double
Beaufort Slim Single
