Rotatable LED Wall Pack
Important: Read all instructions prior to installation.
User Manual
Part Number:
Conduit Mounting Installation
Rev Date: V1 10/13/2017
Rev Date: V1 10/13/2017
5yr
WPR-NW40
WPR-NW80
1. Remove power from circuit.
2. Loosen 2 screws with 4mm Allen wrench
on bottom of light. Remove Bracket from
back of light.
3. Drill 4 holes on the wall using outer-most
holes on bracket as a guide. Drive wall
anchors into holes. Attach mounting
bracket to wall using 4 screws (not
provided).
4. Remove knockout from either side of light. Pull wires from conduit
through knockout. Attach conduit onto light. Make wire connections to
main supply.
3.15in
80mm
5.50in
139.69mm
4.90in
124.45mm
3.15in
80mm
5.50in
139.69mm
4.90in
124.45mm
3.15in
80mm
5.50in
139.69mm
4.90in
124.45mm
5. Mount light on bracket. Tighten 2
screws with 4mm Allen wrench on
bottom of light. Swivel aimable light
bar to desired position, and tighten
lock screw with 2mm Allen wrench.
Rotatable LED Wall Pack
User Manual
Part Number:
WPR-NW40, WPR-NW80
