![background image](http://html1.mh-extra.com/html/sunricher/sr-zv9080a-b/sr-zv9080a-b_manual_1399340001.webp)
Z-Wave Curtain Motor Controller SR-ZV9080A-B
Safety & Warnings
•
DO NOT install with power applied to device.
•
DO NOT expose the device to moisture.
Quick Start
How to install:
•
Step 1: power on the Z-Wave curtain motor controller.
•
Step 2: activate inclusion mode on your Z-Wave controller.
•
Step 3: activate inclusion mode of the curtain motor controller by triple press the network
inclusion/exclusion button. The curtain motor controller will be included to Z-Wave network.
Product Description
The curtain motor controller is a universal, Z-Wave Plus compatible, electric motor controller. The device
allows for controlling motors of roller blinds and venetian blinds, which are single phase AC powered. The
curtain motor controller allows for precise positioning of a roller blind or venetian blind slats. Precise
positioning is available for the motors equipped with mechanic and electronic end switches. The device
also allows for controlling on/off of lights. The module may be controlled wirelessly, through the Z-Wave
network primary controller, or through the switch keys connected to it. In addition, the curtain motor
controller is equipped with Power Metering and over current protection.
The curtain motor controller can be included and operated in any Z-Wave network with other Z-Wave
certified devices from other manufacturers and/or other applications. All non-battery operated nodes
within the network will act as repeaters regardless of vendor to increase reliability of the network.
Calibration button
AC power input
Network inclusion/
exclusion button
Load output
Switch input
Function Introduction
Ratings:120V~,60Hz,MAX:4A( )
FCC ID:XXXSR9080A
K1
K2
L
Q1
N
N
AC 100-240V
S
2
Curtain Motor
SR-ZV9080A-B(908.42MHz)
Made in China
S
1
Q2
Controller
MAX:2A ( )
/
1