RF Wireless LED Dimmer
Feature
Reliable
stable
switch
and
dimming
control
function,control
range
≥
20M.
Battery in the remote is with long life span. It normally can use for 2 years.
Dimming range 0.1-100%.
Model:SR-2833N-Z5 with SR-1009FA series
Use with power repeater to expand the output power unlimitedly.
Enable to control 5 zones separately, And dim or ON/OFF 5 zones at same time ,each zone can be set endless
receivers, each receiver maximally be controlled by 8 different remotes.
Parameter
Switch on/off of lightings slowly, without any flash, meet the comfort of human eyes.
Remote
Receiver
Product Size
Enable be dimmed and ON/OFF by push button after connecting receivers.
Receivers can work with RF-WIFI converter after installing software on IOS and Android system.
Part No.
Input Voltage
Remarks
Current
SR-1009FA
12-36VDC
Constant voltage
4x(60-180)W
4x5A
Output
SR-1009EA
12-36VDC
Constant voltage
4x(96-288)W
4x8A
SR-1009FA3
12-36VDC
Constant current
4x(4.2-12.6)W
4x350mA
SR-1009FA7
12-36VDC
Constant current
4x(8.4-25.2)W
4x700mA
Part No.
Operation Voltage
DIMENSIONS
ø/h (mm)
Operation
Frequency
SR-2833N-Z5
3VDC
38.6x150x12
916.635MHz
REMARKS
RF Wireless
Wiring diagram
150.00 mm
3
8
.6
0 m
m
1
2
.0
0 m
m
Power Supply
12-36VDC
L
N
110V-230VAC
w
h
it
e
SR-1009FA
LED CONTROLLER
1
2
3
4
Learning
Key
w
h
it
e
SR-1009FA
LED CONTROLLER
1
2
3
4
Learning
Key
w
h
it
e
SR-1009FA
LED CONTROLLER
1
2
3
4
Learning
Key
Single color LED Strip
Single color LED Strip
Single color LED Strip
Single color LED Strip
Single color LED Strip
Single color LED Strip
Single color LED Strip
Single color LED Strip
Single color LED Strip
Single color LED Strip
Single color LED Strip
Single color LED Strip
Operation
After you have wired all the receivers according to Figure illustration you need to do the following:
1.
Pull off the plastic film cover of the battery at the back of remote.
2.
If you use multiple receivers, you have 2 choices:
Have all receivers in the same zone like Zone 1 for example or
Have each receiver in a different zone, like Zone 1, 2, 3 and so on
3.
In order for each receiver to know what Zone it belongs to, you will need to “pair” it to the zone you wish to
use: short press the Learning Key on the receiver, then immediately short press the or from the zone you
wish to use (for example ON/Off from zone 1). Once you do that, the LED lights will blink once. Now your remote
and receiver are paired!
4.
Do the same for the other receivers if you use them.
This wireless receiver can work in any of the 5 zones. It has a special “Learning Key” that is in the unit that will
enable you to pair it to any of the 5 zones in the wireless remote control. You can add as many optional
receivers as you wish, to create up to 5 different control zones. Each zone can have an endless number of
receivers, which will let you escalate any installation from small to super-size.
5
