background image

© 2014 by Snow Joe

®

, LLC

All rights reserved. Original instructions.

A Division of Snow Joe

®

, LLC

Model SDJ616-RM

Form No. SJ-SDJ616-RM-880E-MR2

OPERATOR’S MANUAL

13-AMP ELECTRIC LEAF MULCHER/SHREDDER

SAVE THESE INSTRUCTIONS

For household use only

IMPORTANT!

Safety Instructions

All Operators Must Read These 

Instructions Before Use
General Power Tool Safety Warnings

m

CAUTION!

Before using this electric tool, carefully read and observe the 

safety rules and instructions listed below. Before starting work, 

make sure that you know how to stop the machine in case of 

an emergency, The incorrect use of this machine could cause 

serious injury. Keep these instructions in a safe place and on 

hand so that they can be consulted when required.

m

WARNING!

Read all safety warnings and  

all instructions 

Failure to follow all warnings and in-

structions may result in electric shock, fire, or serious injury.

m

WARNING!

 When using electric gardening appliances, 

basic safety precautions should always be followed to reduce 

the risk of fire, electric shock, and personal injury, including the 

following:

m

WARNING!

This electric leaf mulcher/shredder is designed to shred leaves, 

thatch, grass clippings, and pine needles. It cannot be used to 

shred branches, sticks, or brush.

For All Double-Insulated Appliances

1.  Replacement parts – When servicing, use only identical 

replacement parts.

2.  Polarized appliance connections – To reduce the risk 

of electric shock, this appliance has a polarized plug (one 

blade is wider than the other) and will require the use of a 

polarized extension cord. The appliance plug will fit into 

a polarized extension cord only one way. If the plug does 

not fit fully into the extension cord, reverse the plug. If the 

plug still does not fit, obtain a correct polarized extension 

cord. A polarized extension cord will require the use of a 

polarized wall outlet. This plug will fit into the polarized 

wall outlet only one way. If the plug does not fit fully into

 

  the wall outlet, reverse the plug. If the plug still does not 

fit, contact a qualified electrician to install the proper wall  

outlet. Do not change the equipment plug, extension cord 

receptacle, or extension cord plug in any way.

For All Appliances

1.  Avoid dangerous environments – Do not use electrical 

appliances in damp or wet locations.

2.  Do not use in the rain.
3.  Keep children and pets away – 
All bystanders including 

children and pets should be kept a safe distance away 

from the work area.

4.  Dress properly – Do not wear loose clothing or jewelry. 

They can be caught in moving parts. Use of rubber gloves 

and substantial footwear is recommended when working 

outdoors. Wear protective hair covering to contain long 

hair.

5.  Use safety glasses – Always wear protective eyewear 

and use a face or dust mask when operating an appliance 

that generates a significant amount of dust.

6.  Use the right appliance – Do not use the appliance for 

any job except that for which it is intended.

7. 

m

WARNING! – To reduce the risk of electric shock, use 

only with an extension cord intended for outdoor use, 

such as an extension cord of cord type SW-A, SOW-A, 

STW-A, STOW-A, SJW-A, SJOW-A, SJTW-A,  

or SJTOW-A.

8.  Avoid unintentional starting – Do not carry a plugged-in 

appliance with your finger on the switch. Make sure the 

switch is off before plugging in the appliance.

9.  Do not abuse the cord – Never carry the appliance by its 

cord or yank the cord to disconnect it from the receptacle. 

Keep the cord away from heat, oil, and sharp edges.

10. Do not grasp the exposed cutting blades or cutting 

edges when picking up or holding the appliance. 

(This precaution only applies for grass shears and similar 

appliances.)

11. Do not force the appliance – It will do the job better and 

with less likelihood of a risk of injury if it is used at the rate 

for which it was designed.

12. Do not overreach – Keep proper footing and balance at 

all times.

13. Stay alert – Watch what you are doing. Use common 

sense. Do not operate the appliance when you are tired. 

14. Disconnect the appliance – Disconnect the appliance 

from the power supply when it is not in use, before 

servicing it, and when changing accessories. 

1

Summary of Contents for SDJ616-RM













Reviews: