background image

Solar Pool Heater

for above and inground swimming pools

(Not recommended for Inflatable Pools)

Installation & Owners Manual

Thank you for choosing the Sungrabber solar pool heating system.  Sungrabber is 

proudly manufactured in the United States. Since 1969, we have provided high-quality, 

long-lasting products that help our customers save money on energy costs and reduce 

the environmental impact associated with traditional energy sources.    

Read this manual completely before installing your system. Use caution when selecting 

the location to mount your solar collectors.  Failure to observe safe practices on a roof 

or other elevated structure may result in falling, leading to serious injury.  Unless you 

are experienced and have proper safety equipment, hire someone with the necessary 

experience to do the installation.  If you build a ground rack, ensure that it does not en-

able children access into the pool.

        Overview....……………….…………….…………………………....

        Installation..…….…....……………………………………………..…

        Operation & Winterization......………….……………………………

        Troubleshooting….…………………..…………………...…….........

        Warranty............………..……….…………………..…………………

Page 

1-2

3-7

8

9

10

Summary of Contents for Solar Pool Heater













Reviews: