Canopy set up instructions
Step 1.
Unpack canopy contents
from carry bag (Fig 1.1 & 1.2).
Fig 1.1
Fig 1.2
Step 2.
Place the frame in the
center of the set up area (Fig 2.1).
With a partner on the opposite
corner of the frame, hold onto the
outer legs, lift frame off the ground
slightly for clearance and take a few
steps backward until arms are at full
length (Fig 2.2).
Fig 2.1
Fig 2.2
Step 3.
Use the hook-n-loop strips
to secure each corner of the top to
the frame on corresponding hook-n-
loop that is already attached to the
frame (Fig 3.1). Continue walking
frame legs outward until the frame is
fully extended (Fig 3.2).
Fig 3.1
Fig 3.2
Step 4.
Hold the leg of the frame
with one hand and lift the slider until
it locks into place (Fig 4.1).
Fig 4.1
Step 5.
The adjustable legs offer
multiple height levels. To adjust,
place a foot on the bottom leg to
help stabilize and lift the leg up until
button pops into place (fig 5.1).
Repeat for each leg.
Fig 5.1
