![background image](http://html1.mh-extra.com/html/stuntcams/sc-hdgb/sc-hdgb_user-manual_1387371001.webp)
User Manual
Product diagram
The product has an internal, rechargeable battery; charge the battery fully before you use it in the first
time. The battery can be charged by following ways:
1) By connecting to PC: Using the USB cable provided, plug the product into your computer's
USB port.
2) By battery charger: Plug the product into electrical outlet using the USB cable.
During charging, the yellow indicator light will blink. When the battery’s power is full, the blue
indicator light turns on.
Note: when the battery’s power is low, the yellow, the blue indicator will blink for
seconds, and then the product will shut down automatically.
Recording:
Press and hold the Record/Stop button for about 3 seconds to turn on and start recording, the
blue light will turn on and then the yellow light will turn on and flash slowly 10 times and then turn off.
Click the Record/Stop button to stop the video. The files will automatic save, the blue lights will
stay on when finished. If the continuous recording time is over 15 minutes, the product will save the
current recording data, and then restart video recording automatically.
To obtain better video, be in a well lit room or outside, staying at least two feet from the target.
Power off:
Press and hold the Record/Stop button for about 3 seconds, the yellow and blue indicators will
flash quickly 3 times and then turn off to indicate that the product is off.
Connecting to PC:
When the product is in Standby Mode or turned off, you can insert the product into the USB
port of your PC. Do not connect the product to the computer during video recording or while taking a
photo. A removable disk symbol will appear on the computer screen. To disconnect from the computer,
right click on a removable disk symbol and select “eject.”
When connected to a PC, if there is no response for 30 seconds, disconnect the product and
reconnect again.