background image

ASSEMBLY MANUAL 

PRO LINE S and SL  

NOTE: In order to avoid injury or damages,

please do not try to assemble your desk alone.

PRO - Line is a heavy desk, which requires

at least two people to carry out assembly. 

Please assemble on soft surface to avoid 

scratches to the lacquer.

!

www.studiodesk.net

Check our Step by step video assembly manuals on our
Youtube chanel

 https://www.youtube.com/c/StudioDesk

Links can be found in User manual section on our website.  

Summary of Contents for PRO LINE S

Page 1: ...O Line is a heavy desk which requires at least two people to carry out assembly Please assemble on soft surface to avoid scratches to the lacquer www studiodesk net Check our Step by step video assembly manuals on our Youtube chanel https www youtube com c StudioDesk Links can be found in User manual section on our website ...

Page 2: ...anagement 6 Video monitor s shelf 7 Outer Legs left and right 8 Inner legs left and right Hardware Wooden parts Tools needed Phillips screwdriver 2 4 3 7 8 5 6 1 L R L R L R 9 1 Metal corner 20 pcs Desk tips 8 pcs 2 M6 Screw 98 pcs 3 M6 Screws for Rack rails 4 Wooden Dowels 34 pcs 5 Rack rails 8 U 4 pcs 6 4 pcs 9 Washers M6 7 pcs 8 Cable inlays for Legs 2 pcs 7 Stickers to cover inserts Black Cage...

Page 3: ... illustration 8 10 4 Step Four Place inner leg to assembled section onto the corresponding holes on the leg Take special care to avoid scratching the lacquered surface Push the Inner leg down until the dowels seat properly in their respective holes Use a rubber hammer if needed Usually it is not necessary 2 Step Two Assemble parts together on dowels as shown in the illustration www studiodesk net ...

Page 4: ...he side modules closer until the dowels seat properly in their respective holes in legs and and desk surfaces are tight to each other 6 Screw the desk tips to the legs on both left and right module 8 Step Eight 9 Step Nine Fix middle section to the legs using metal corners 9 and M6 screws 11 Install metal bar to top shelf using M6 Screws 10 Step Ten Install rack rails 14 to the legs using M6 screw...

Reviews: