Storm 4-Ball Rolling Thunder
™
Handle Replacement Instructions
Step 1.
Making sure the strap clip is undone,
Step 4.
Pull entire handle assembly out of the
remove the top bag from the bottom bag.
bottom bag base/frame. Make sure the square
outer sleeves are also removed.
Step 2.
Remove the bottom bag rack screws, (5)
total. Slide the rack away from handle.
Step 5.
Save the intermediate wrapped sleeves
that are on the bottom rails. These are very
important and MUST be on the replacement
handle in order for both locking stages to work.
Step 3.
Take screws out of handle, (4) total.
Step 6.
Make sure the replacement handle is fully
collapsed and that the outer sleeves are pushed all
the way up into the handle. NOTE: it will take some
adjusting to get the sleeves to fit into the square
openings.
