background image

Before using your new Emergency LED Lamp, please read this 
instruction manual to prevent any damage. Put it away in a safe 
place for future references.

IMPORTANT

Do not use or store the equipment near wet places. May cause 
malfunction or electrical shock.
Warranty is void if you try to open the lamp.
Do not try to open the equipment, may cause malfunction.
Do not expose the equipment to extreme weather.
Battery replacement can only be made by authorized personnel.
Clean only with a soft, dry cloth.
Battery must be fully charged and discharged every three months 
in order to improve its life.

CONTROLS

1.- Test / Charge
When you connect the camera to an AC outlet, this button will be lighted  
in red, indicating the battery is charging. With the lamp plugged to the 
outlet, press this button to test it.

2.- Off / Power
Connected to the outlet, this button will be lighted un green, indicating 
that the energy is well provided.

3.- On / Trouble
With the lamp unplugged from the outlet, press this button to light the 
lamp on.
If there are troubles (see list below) with the lamp, this button will be 
lighted in yellow.

Failures:

Low battery energy
No LEDs or damaged LEDs in the lamps

4.- Lamps







Before using your new Emergency LED Lamp, please read this 
instruction manual to prevent any damage. Put it away in a safe 
place for future references.

WARRANTY

This Steren product is warranted under normal usage against defects in workmanship and materials to the 
original purchaser for one year from the date of purchase.

CONDITIONS

1.- This warranty card with all the required information, invoice or purchase ticket, product box or package, 
and product, must be presented when  warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free of charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim was received.
4.- Steren sell parts, components, consumables and accessories to customer, as well as warranty service, 
at any of the addresses mentioned later.

THIS WARRANTY IS VOID IN THE NEXT CASES:

If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow 
enclosed instructions, improper repair by unauthorized personnel, improper safe keeping, among others.

a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.

RETAILER INFORMATION

Name of the retailer

Address

Product

Brand

Part number

Serial number

Date of delivery

In case your product fails or have questions, please contact your nearest dealer. If you are in 
Mexico, please give a call to our Call Center.

Call Center

01 800 500 9000

Product: Emergency LED Lamp
Part number: LAM-500
Brand: Steren

INSTALLATION AND HOW TO USE THE LAMP

1.- Plug the power cord into an AC outlet.
2.- Charge and Power LEDs light on
3.- After 5 minutes, unplug the lamp from the outlet, it will simulate a 
failure in the energy. Automatically it will light up.
4.- If you want to turn the lamp off press Off / Power button.
5.- Reconnect the lamp to the outlet, the lamp will turn on automatically 
when the power supply fails.
6.- Remember, you can place the lamps in the required position.

You must plug the lamp permanently to an outlet in order to use 
the emergency power on.
You can place the lamp in a wall, just drill the wall following the 
holes in the rear side of the lamp.
For a fully battery recharging, plug the device into an outlet for 24 
hours. 
With a full battery you will have 18 hours of continuous use.

SPECIFICATIONS

Input:       

120V~    60Hz    4,5W

MAX

Output:    

2x0,5W

Battery type:   

6V   

4Ah

LEDs:    

2x100mA

Charging time:  

24 hours

Working time:  

>18 hours

Humidity:  

<90%

Time after a 
failure:     

<1s

Working 
temperature:   

-10°C to  50°C

Product design and specifi cations are subject to change without 
notice.

1

2

3

4

4

You must plug the lamp permanently to an outlet in order to use 
the emergency power on.
You can place the lamp in a wall, just drill the wall following the 
holes in the rear side of the lamp.
For a fully battery recharging, plug the device into an outlet for 24
hours. 
With a full battery you will have 18 hours of continuous use.

Product design and specifi cations are subject to change without
notice.

Reviews: