I n s t a l l a t I o n G u I d e
for the
SB-SC-TCG2/10W3v3
sKu#94515
2011
Thank you for choosing a JL Audio Stealthbox
®
for your automotive sound system. With proper installation, your new vehicle-
specific enclosed subwoofer system will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox
®
installed by your authorized JL Audio dealer. The installation
professionals employed by your dealer have the necessary tools and experience to disassemble and reassemble your vehicle
properly. Also, keep in mind that your warranty coverage extends to 2 years if your system is installed or approved by your
authorized JL Audio dealer. If you prefer to perform your own installation, please read this installation guide completely
before beginning the process.
If you choose to perform the installation yourself, it is absolutely vital that
the Stealthbox
®
be properly mounted to the vehicle according to these
instructions. Failure to mount the enclosure properly presents two problems:
1) The sub-bass performance will suffer due to the movement of the enclosure
caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a collision
or sudden deceleration.
s t e P 1
Empty out the trunk of the car so that you have a clean area
to work in.
Continued on Next Page
s t e P 2
Remove the woofer from the Stealthbox®, and place the
enclosure into position as shown.
s t e P 3
Using a 1/2” drill bit through the existing hole in the
Stealthbox®, mark the plastic side panel. Do not drill through
the panel at this time.
SB-SC-TCG2/10W3v3 INSTR_SKU# 011323
InstallatIon
d I F F I C u lt Y :
2
5
out
oF
estImated tIme:
1 HouR
