StarTech.com SM2DUPE11, Quick Start Manual

Page: 1 / 2

Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: April 26, 2021 10:15 AM
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Product Diagram (SM2DUPE11)
Front View
Top Edge View
Component Function
1
LCD Display • Displays
Menu
options, status, and details
2
2.5”/3.5” SATA Drive Connector • Connect a source
2.5”/3.5” SATA Drive
3
M.2 Drive Connector • Connect a source
M.2 SATA or NVMe Drive
4
M.2 Drive Connector • Connect a target
M.2 SATA or NVMe Drive
5
Drive-Tray Screw /Drive -Tray
Screw Hole
• Secures the
Drive Tray
6 Rubber Drive Holder • Secures the M.2 SATA or NVMe Drive
7
2.5”/3.5” SATA Drive Connector • Connect a target
2.5”/3.5” SATA Drive
8
LED Indicators • Indicates
Drive Status
9 LCD Display Buttons • Navigate through the LCD Display
10 Power Switch • Toggle ON (I) or OFF (O)
11
Power Connector • Connect the
Universal Power Adapter
1 to 1 NVMe/SATA Drive Duplicator and Secure Eraser
Package Contents
• Duplicator Dock x 1
• SATA Drive Extensions Cable x 2
• Anti-Slip/Vibration Pads x 2
• Universal Power Adapter x 1
• Regional Power Cords (NA, JP, EU, UK, ANZ) x 5
• Quick-Start Guide x 1
Product Information
For product information, technical specifications, manuals, and Declarations of
Conformance please visit:
www.startech.com/SM2DUPE11
Product Requirements
• M2 SATA/NVMe SSD x 2
• 2.5”/3.5” SATA Drive x 2
Installation
Power the Drive Duplicator and Secure Eraser
1. Connect the
Universal Power Adapter
to the appropriate
Regional Power Cord
.
2. Connect the
Universal Power Adapter
to the
Power Connector
on the
Drive
Duplicator and Secure Eraser .
3. Connect the Regional Power Cord to a Power Source .
4. Toggle the
Power Switch
to the
ON (I)
position.
Connect a 2.5”/3.5” SATA Drive
Note:
Do not connect drives directly into the
Hard Drive Duplicator and Secure
Eraser
, as it puts undue strain on the device connectors.
1. Connect the
Drive Connector Cable(s)
to
2.5”/3.5” SATA Drive(s)
and to the
2.5”/3.5” SATA Drive Connector(s) on the Drive Duplicator and Secure Eraser .
2. Place the Drive Duplicator and Secure Eraser on the Anti-Slip/Vibration Pads
(included).
Note:
Avoid placing drives directly on a metal surface.
Connect M.2 SATA or NVMe Drive
1. Determine the size of the M2. SATA or NVMe Drive(s) .
10 11
2
3
5
9
1
8
7
4
*Product may vary from photos
*Product may vary from photos
6