![background image](http://html.mh-extra.com/html/startech-com/ltanchorl/ltanchorl_quick-start-manual_1365496001.webp)
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: March 21, 2019 11:10 AM
Product Diagram (LTANCHORL)
Note:
Security Cable and Lock sold separately.
Component
Function
1
Security Plate
• Used to hide the
Mounting Screws
.
• Used to prevent access to the
Mounting
Screws
.
2
Desk Anchor
• Used in place of a stationary object to secure a
connected
Device
.
Requirements
For the latest requirements, please visit
.
Installation
Notes:
The
Desk Anchor
is not recommend for use outdoors, in high humidity
conditions, on glass, ceramic tile, or water absorbent materials.
The following surface types must have a primer applied before the
Desk Anchor
can
be properly installed: copper, brass, or plasticized vinyl.
For maximum security, it is recommended that both
Adhesive Backing
and
Mounting Screws
are used when installing the
Desk Anchor
.
Laptop Lock Anchor - Large
1
1. Position the
Desk Anchor
on the surface you wish to mount it to.
Desk Anchor
Note:
Use a pencil to draw an outline around the
Desk Anchor.
This will ensure that
you know the area you need to score using the
Abrasive Pad
.
2. Use the
Abrasive Pad
(included) to score the surface area you intend to mount the
Desk Anchor
on. Be careful to only score the surface that the
Desk Anchor
will
cover.
3. Use the
Alcohol Pad
(included) to clean the scored surface prior to installation.
Allow the alcohol to dry before installing the
Desk Anchor
on the surface.
Note:
(Optional) Use the
Screw Holes
on the
Desk Anchor
as a guide to drill pilot
holes.
4. Remove the
Adhesive Backing
on the back of the
Desk Anchor,
exposing the
adhesive surface. Secure the
Desk Anchor
to the scored area. Apply the adhesive
backing to the surface at room temperature 60 °F (16°C).
5. Before connecting a
Security Cable
to the
Desk Anchor,
allow the adhesive
backing at least 24 hours to bond to the surface.
6. Insert the
Mounting Screws
(x2) into the
Mounting Holes
on the
Desk Anchor
.
Installing the Mounting Screws
2