background image

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: August 12, 2021

Product Diagram (10P6G-PCIE-SATA-CARD)

Front View

Port

Function 

1

SATA Ports x 10

•  Connect 

SATA Storage Devices

 to the 

PCIe SATA 

Card

 using a

 SATA Cable

2

PCIe x2 Connector

•  Connect the 

PCIe SATA Card

 to the 

PCIe Slot

 in 

the 

Computer

Product Information

For the latest product information, technical specifications, manuals, and Declarations 

of Conformance, please visit:  

www.startech.com/10P6G-PCIE-SATA-CARD

.

Package Contents

• PCIe SATA Card x 1
• Full-Profile Bracket (Installed) x 1
• Low-Profile Bracket x 1
• Quick-Start Guide x 1

Requirements

• Computer with an available PCIe slot (x4/8/16)
• Phillips Head Screwdriver
• SATA Cables

10 Port SATA 6Gbps PCIe Controller Card

Hardware Installation

Warning: PCIe Cards

 can be damaged by static electricity. Make sure that the 

Installer

 is properly grounded before they open the 

Computer Case

 or touch the 

PCIe SATA Card

. The

 Installer

 should wear an 

Anti-Static Strap 

when installing any 

computer component. If an 

Anti-Static Strap

 is not available, discharge any built-up 

static electricity by touching a large 

Grounded Metal Surface

 for several seconds. 

Only handle the

 PCIe SATA Card 

by its edges and do not touch the gold connectors.

Installing the Low-Profile Bracket

By default the 

Full-Profile Bracket

 is attached to the 

PCIe SATA Card

. Depending on 

the system configuration it may be necessary to remove the 

Full-Profile Bracket

 to 

replace with the 

Low-Profile Bracket

 (included).

1.  Remove the 2x 

Phillips Head Screws

 securing the 

Full-Profile Bracket

, using a 

Phillips Head Screwdriver

.

2.  Remove the 

Full-Profile Bracket 

and replace with the 

Low-Profile Bracket 

(included).

3.  Install the 2x 

Phillips Head Screws 

removed in step 1 and tighten, using a 

Phillips 

Head Screwdriver

.

Installing the Card

1.  Turn off the 

Computer

 and any 

Peripheral Devices

 that are connected  

(e.g. printers, external hard drives, etc.).

2.  Unplug the 

Power Cable

 from the rear of the 

Computer

 and disconnect any 

Peripheral Devices

 that are connected.

3.  Remove the 

Cover

 from the 

Computer Case

Note: 

Consult the documentation that came with the 

Computer

 for details about 

how to do this safely. 

4.  Locate an open

 PCIe Slot

 (x4/8/16) and remove the corresponding 

Metal Cover 

Plate

 from the rear of the 

Computer Case

. In most instances, the 

Metal Cover Plate

 

is attached to the rear of the

 Computer Case

 with a single 

Phillips Head

 

Screw

Save this 

Phillips Head Screw

 for the next step. 

5.  Gently insert the 

PCIe SATA Card 

into the open 

PCIe Slot

 (x4/8/16) and fasten the 

Bracket

 to the rear of the 

Computer Case

, using the 

Phillips Head

 

Screw

 from step 

4. 

6.  Connect a maximum of 10 

SATA Storage Devices

 to the 

SATA Ports

 of the 

PCIe 

SATA Card

 using 

SATA Cables.

7.  Replace the 

Cover

 from the 

Computer

 that was removed in step 3.

8.  Reconnect all of the 

Peripheral Devices

 that were disconnected in step 2.

9.  Reconnect the 

Power Cable

 to the rear of the 

Computer

.

2

1

1

Отзывы: