background image

Star

Manufacturing

International Inc.

10 Sunnen Drive

St. Louis, MO 63143
Phone: (314) 678-6303

Fax: (314) 781-2714

Installation and

Operating Instructions

Instructions d’installation  

et d’opération

ULTRA-MAX™ GAS GRIDDLE MODELS

GRILS A GAZ ULTRA-MAX MODELES

 

824MA 824TA  824TSA  824TCHSA  824TSCHSA

  836MA 836TA  836TSA  836TCHSA  836TSCHSA

  848MA 848TA  848TSA  848TCHSA  848TSCHSA

  860MA 860TA  860TSA  860TCHSA  860TSCHSA

  872MA 872TA  872TSA  872TCHSA  872TSCHSA

   2M-Z16558  Rev. B   11/05/2013

WARNING:  Improper installation, 

adjustment, alteration, service or 

maintenance can cause property 

damage, injury or death.  Read the 

installation, operating and maintenance 

instructions thoroughly before installing 

or servicing this equipment.

WARNING:  This appliance shall be 

installed in accordance with current 

regulations and used only in well-

ventilated space.  Refer to instructions 

before installing and using this 

appliance.

In addition, there should be posted, in a 

prominent location, detailed instructions 

to be followed in the event the operator 

smells gas.  Obtain the instructions from 

the local gas supplier.

AVERTISSEMENT

: L’installation inexacte, le réglage, 

le changement, le service ou l’entretien peuvent 

causer des dégats matériels, des dommages ou la 

mort. Lisez les instructions d’installation, d’opération 

et d’entretien complètement avant d’installer ou 

entretenir ce matériel. 

AVERTISSEMENT

: Cet appareil sera installé selon 

des règlements actuels et utilisé seulement dans 

l’espace bien-aéré. Référez-vous aux instructions 

avant d’installer et utiliser cet appareil. 

POUR VOTRE SÛRETÉ

: N’enregistrez pas ou 

n’utilisez pas l’essence ou d’autres vapeurs ou 

liquides inflammables à proximité de ceci ou d’aucun 

autre appareil. 

En outre, là devrait être signalé, dans un 

emplacement en avant, des instructions détaillées 

d’être suivi en cas que l’opérateur sent le gaz. 

Obtenez les instructions du fournisseur local de gaz. 

FOR YOUR SAFETY:  

Do not store or 

use gasoline or other flammable vapors or 

liquids in the vicinity of this or any other 

appliance.

Summary of Contents for 824MA





























Reviews: