background image

40529-1504

1

24

Instructions

E-8-MB-E-S

WARNING

Tip Over Hazard

A child or adult can tip the safe and be 
killed or seriously injured.

Failure to secure the safe as shown in 
these instructions can result in death or 
serious injury to children and adults.
Children should not play with or around 
the safe at any time.

IMPORTANT

Serial # 

Your Electronic Safe Combination #

NOTE:  You can store your Key #, Serial # and 
Combination on Stack-On’s SECURE web site – 
www.stack-on.com under Customer Service.
Storing your Key # or Combination will provide instant 
access to this important information should you ever 
lose your keys or your combination.  
Only you will have access to this information.

Tools required:  
drill
7/16” drill bit
3/8” drill bit
3/32" drill bit
17mm socket wrench
Phillips screwdriver.

®

Screw the 3 handle spokes into the hub and hand 
tighten.  These spokes are located in the front foam 
packaging.  

NOTE:  Do not use this handle to move the safe.

HANDLE ASSEMBLY

•   Record the serial number from the tag on the 
back of the safe or from the tag on the front 
bottom corner of the safe.

•   Keep keys and combination in a secure place 
away from children.

•   Do not store the back up key, your combination 
or this document in the safe.

•   Do not move this safe using its handle.  The 
handle should only be used for opening and 
closing the door of the safe.

•   Do not store electronic media, computer disks, 
audio-visual media or photographic negatives in 
this safe.  This material will not survive the rated 
internal temperature of the safe.  This material 
may be damaged or destroyed.

•  Warning:  Keep your safe closed and locked at 
all times  when not in use.  Children could 
accidentally be locked inside the safe.

Hardware Included:  
(2) M10x70 Lag screws
(2) washers  
(2) plastic anchors
For model E-8-MB-E-S:
(4) 1/2" screws
For model E-13-MB-E-S:
(6) 1/2" screws
(2) 3/8" screws

E-13-MB-E-S

Summary of Contents for E-13-MB-E-S

























Reviews: