ST X-STM32MP-MSP01, Getting Started

Page: 1 / 38

Introduction
The X-STM32MP-MSP01 multisensor expansion board embeds the following devices:
• the ISM330DHCX iNEMO 3-axis accelerometer and 3-axis gyroscope
• the IIS2MDC 3-axis magnetometer
• the IIS2DLPC 3-axis accelerometer
• the MP23DB02MM digital microphone
• the LPS22HH pressure sensor
• the STTS22H temperature sensor
• the VL53L5CX Time-of-Flight sensor
• the VD6283TX ambient light sensor
• the ST25DV64KC NFC RFID tag
The X-STM32MP-MSP01 interfaces with the STM32MP157F-DK2 microprocessor via a 40-pin GPIO connector, using I²C, SPI,
and GPIO peripherals.
The
X-STM32MP-MSP01 expansion board is compatible with both the STM32MP157F-DK2 and Raspberry Pi GPIO expansion
connector layout.
Figure 1. X-STM32MP-MSP01 expansion board
Getting started with the X-STM32MP-MSP01 expansion board for the
STM32MP157F-DK2 discovery kit
UM3076
User manual
UM3076 - Rev 1 - October 2022
For further information contact your local STMicroelectronics sales office.
www.st.com