background image

Precaution

    Before operating the unit, read this manual  thoroughly and keep it handy 
    for future reference .
    To avoid injury or accident , read the following precautions before 
    installing and operating the unit .

THANK YOU FOR PURCHASING A SOUNDSTORM 

MULTIMEDIA PLAYER

.

ABOUT THE LIQUID CRYSTAL DISPLAY (LCD) PANEL

    Do not press on the LCD panel on the unit as doing so can distort the 
    picture or cause a malfunction . The picture may become unclear , or the
    LCD panel may be damaged .

NOTES ON CLEANING

    -Clean the LCD panel with a slightly damp soft cloth. 
    -Do not use solvents such as

 

benzine, thinner, commercially available 

    cleaners or antistatic spray .

  -

Do not use alcohol to clean the screen . 

    If your car was parked in a cold or hot place, the picture may not be clear .
    The monitor is not damaged . The picture will become clear the temper-
    ature in your car becomes normal .

DO NOT install any receiver in locations where;
- it may obstruct the steering wheel and gearshift lever operations, as this 
  may result in a traffic accident.
- it may obstruct the operation of safety devices such as air bags, as this
  may result in a fatal accident.
- it may obstruct visibility.
DO NOT operate any receiver while manipulating the steering wheel, as 
  this may result in a traffic accident. 
The driver must not watch the monitor while driving.
IF THE DRIVER watches the monitor while driving, it may lead to 
  carelessness and cause an accident.
IF YOU NEED to operate the receive while driving, be sure to look ahead 
  carefully or you may be involved in a traffic accident.
IF THE PARKING BRAKE is not engaged.“ ParkingBrake” flashes on the 
  monitor, and no playback picture will be shown.
- This warning appears only when the parking brake wire is connected to 
  the parking brake system built in the car ( refer to the electric connection)

ON INSTALLATION

 

Summary of Contents for SOUNDSTORM




































Reviews: