background image

 

( 1 / 4) 

 

 

 

 

 

 

 

 

 

 

 

Instruction Manual 

 
 

Models: 

 

 

version 1.0 since 3 February 2020

 

 

 
 

ATTENTION! 

 

This instruction manual contains important information about the installation and the use of 

the equipment. Please read and follow these instructions carefully. 

 

Always ensure that the power to the equipment is disconnected before opening the 

equipment or commencing any maintenance work. 

 

DST4_en_manual_M080 

 
 

 

DST 4-way DMX Splitter

 

DST4-3, DST4-5        

DST4-C        

Summary of Contents for DST Series

Page 1: ...ortant information about the installation and the use of the equipment Please read and follow these instructions carefully Always ensure that the power to the equipment is disconnected before opening the equipment or commencing any maintenance work DST4_en_manual_M080 DST 4 way DMX Splitter DST4 3 DST4 5 DST4 C ...

Page 2: ...owerCon blue connector Standard supply is UNISCHUKO lead with Neutrik PowerCon Always respect the markup of L and N on connectors for correct wiring of Line and Neutral DMX connection DMX connectors are located on both sides of the splitter board These are separated to two groups First group is wired in ration 1 1 and marked as DMX input and DMX thru This line is not optically isolated and when th...

Page 3: ...that DST4 is receiving the DMX signal Speed of light on these LEDs also indicates the refresh rate of DMX signal Fast blinking high refresh rate slow blinking slow refresh rate On the rear panel of DST4 there are outputs A D which are retransmitting the input to the optically isolated outputs If there of data LEDs is off unplug the signal cable corresponding to this output and check the cable for ...

Page 4: ...2 31 EEC Name of producer SRS Group s r o Address of producer Rybnicna 38 B SK 83107 Bratislava Slovak Republic Declares that the product Name of product DST4 way DMX splitter Type DST4 Corresponds to the following product specifications Safety EN60065 resp EN 60950 EMC EN55103 1 resp EN55103 2 Bratislava 10 May 2011 Robert Sloboda Copyright 2017 SRS Group s r o Specifications subject to change wi...

Reviews: