background image

Important

Before using this product:

•  Read this manual

•  Comply with all safety and operating instructions

•  Ensure all parts and correct quantities are included

Important

Avant d’utiliser ce produit:

•  Veillez à lire ce guide

•  Respectez les consignes de sécurité et d’utilisation

•  Vérifiez que vous disposez de toutes les pièces 

nécessaires à l’installation

Importante

Antes de utilizar este producto:

•  Lea este manual

•  Cumpla con todas las instrucciones de prevención de 

accidentes y operativas

•  Revise que todas las partes y las cantidades correctas 

estén incluidas

Any parts damaged during shipment must be reported within 5 

days of receipt.  To report information regarding missing parts or 

damage, to purchase parts or accessories, or if you have any 

questions, please contact us.

Thank you for purchasing Spectrum products!

Les pièces endommagées pendant le transport doivent faire 

l’objet d’un rapport dans les 5 jours de leur réception. Veuillez 

prendre contact avec nous si des pièces manquent ou sont 

abîmées, si vous avez des questions, ou encore pour acheter 

des pièces ou des accessoires.

Merci pour votre achat d’un produit Spectrum!

Si alguna parte se dañó durante el embarque, deberá reportarla 

en un lapso de 5 días a partir de la recepción.  Para reportar 

cualquier información sobre partes faltantes o dañadas, para 

adquirirlas o comprar accesorios, o bien, si tiene alguna duda, 

póngase en contacto con nosotros.

¡Gracias por adquirir productos Spectrum!

??

Owner’s Manual

Le manuel du propriétaire

El manual del propietario

Video

Vidéo

Vídeo

Specs

Spécifications

Especificaciones

800-235-1262

http://www.spectrumfurniture.com

Owner’s Manual

0120237R4 Page 1 of 17

Link Lectern

55115

Media Manager Series

36”H shown with plain worksurface, 

metal side panels, instructor-side 

door and keyboard tray

41”H shown with surround, 

metal side panels, instructor-

side door, and keyboard tray

41”H shown with Overbridge 

Control Console, laminate side 

panels, instructor-side door, and 

keyboard tray

Summary of Contents for Link Lectern Media Manager Series


















Reviews: