background image

1

01/07

ID#   M316001

Toll-Free Customer Service Number for U.S: 

1-800-558-5234,

For Canada:  

1-800-284-8339

,

For Europe:

00 800 555 85234

(Sweden: 

009 555 85234

),

For Australia:

1-800-632 792

Internet Address:

www.huffysports.com          www.spalding.com

REQUIRED TOOLS

AND MATERIALS:

• (2 each) Wrenches and/or

Socket Wrenches and Sockets
(Deep-Well Sockets are
Recommended).

• Extension is Recommended.

AND/OR

• Large & Small Adjustable

Wrenches

OPTIONAL TOOLS

AND MATERIALS:

Universal Elevator Mount

Owners Manual

Customer Service Center

• N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A.

Write Model Number

From Box Here:

READ AND UNDERSTAND
OPERATOR'S MANUAL
BEFORE USING THIS UNIT.

FAILURE TO FOLLOW
OPERATING INSTRUCTIONS
COULD RESULT IN INJURY
OR DAMAGE TO
PROPERTY.

WARNING!

• 2 Capable Adults

• Carpenter’s Level

• 15’ Tape Measure

• Pencil

• Drill and Drill Bit (3/8")

• Step Ladder 8ft. (2.4 m)

• Needle-Nose Pliers

7/16"

1/2"

9/16"

3/4"

7/16"

1/2"

9/16"

3/4"

This manual, accompanied by sales receipt, should be saved and kept on hand as a

convenient reference, as it contains important information about your model.

Adult Assembly Required.

Due to various mounting
methods, additional
tools and materials may
be required.

NOTE:

Mount, Pole
and Board
style will vary.

NOTE:

Summary of Contents for M316001
















Reviews: