Incorrect use of this tool can
result in death or serious
injury. For your own safety,
read and understand this
entire document before using.
INJURY HAZARD!
•
Ensure table is properly set up and connect-
ed to a dust collection system before using.
•
Only use table to collect wood dust.
To reduce risk of eye injury
or lung damage from dust,
always wear safety glasses
and a respirator when
operating downdraft table!
Figure 1. SB1090 37" x 53" Downdraft Table.
Figure 2. Model SB1090 Inventory.
A
B
C
D
E
F
INSTRUCTION SHEET
P.O. Box 2027, Bellingham, WA 98227 U.S.A.
PHONE: (360) 734-1540 •
www.southbendlathe.com
Model SB1090
37" x 53" Downdraft Table
Copyright © April, 2020 by South Bend Lathe Co.
WARNING: No portion of this manual may be reproduced without written approval.
#KS21049 Printed in Taiwan
Table Size ................................................. 37" x 53"
Shoulder Table Size ................................... 6" x 53"
Table Height Range ................................... 26"–43"
Dust Port Size ......................................................4"
Load Capacity (Per Suction Board) .......... 40.5 lbs.
Weight ......................................................... 140 lbs.
Specifications
The Model SB1090 37" x 53" Downdraft Table
features heavy-duty steel-frame construction,
removable table boards, an internal V-bottom for
directing air flow, and two 4" dust ports.
Both table shoulders sit 1
1
⁄
2
" below the center
work table for efficient edge-sanding. Table
height can be adjusted from 26" to 43" tall.
Main Inventory (Figure 2)
Qty
A.
Table ...............................................................1
B.
Suction Boards ...............................................7
C.
Shoulder Suction Boards ...............................2
D.
Foot Pads ........................................................4
E.
Lower Support Legs .......................................4
F.
Upper Support Legs .......................................4
Inventory
Not Shown
Qty
•
Flange Bolts
5
⁄
16
"-18 x
1
⁄
2
" .............................32
•
Hex Nuts
1
⁄
2
"-13 ..............................................4
•
Work Stop Nuts ..............................................8
•
Work Stops .....................................................8
•
Grommets ...................................................264
