background image

 

 

About this manual: 

The product described in this manual has been developed and produced by 
Hoontech Co., Ltd. 

  

SoundTrack Audio DSP24 Value is a trademark of Hoontech Co., Ltd. 

  

SoundTrack Audio DSP24 Value Bracket is a trademark of Hoontech Co., 

Ltd. 

  

Microsoft, Windows, Windows 95, Windows 98 and Windows NT are 

registered trademarks or trademarks of Microsoft Corporation. 
All other brand and product names are trademarks or registered trademarks of their 
respective holders. 

Dezember 2000 

It is the policy of Hoontech to improve products as new technology, newer 
components, improved software and drivers become available. Hoontech, therefore 
reserves the right to change specifications without prior notice. 

A/S Center 

Hoontech Co., Ltd. 
4th Flr., Minkyung Bldg., 
#332 Songne-1Dong, Sosa-Ku, 
Bucheon City, Kyungki-Do, Korea 
Tel.: +82-32-611-1994 
Fax: +82-32-612-0079 
Internet: http://www.hoontech.com 
Copyright      1998, 1999, 2000 Hoontech Co., Ltd. 
This documentation was created by Hoontech Co., Ltd. (Korea) and RIDI 
multimedia (Germany). 

Note: 

To avoid damage of your speakers, always turn down the volume or 

turn off the power of your amplifier connected to the SoundTrack Audio 
DSP24 Value when you are rebooting or shutting down your PC. 

- 2 - 

 
 
 
 
 
 
 
 
 
 
 
 
Contents 
I. Introduction............................................................ 3 
II. Specifications ........................................................ 5

 

III. In- and output connectors .................................... 6 
SoundTrack

 Audio 

DSP24 Value PCI-card 6

 

SoundTrack

 Audio 

DSP24 Value Bracket 7

 

Summary of Contents for Audio DSP24 Value


































Reviews: