background image

Getting started

Charge the supplied rechargeable battery before using it for the first time.

 Insert the rechargeable battery.

b

Layer

e

E

b

Charge the rechargeable battery.

How to assemble the battery charging
stand

b

1

Connect the supplied AC power adaptor to DC IN 3V.

2

Place the player on the battery charging stand.

Full charging takes about 6 hours and then the CHARGE lamp will go off when
charging is complete.

Do not operate the player when you place it on the battery charging stand
or during charging.  If you do so, it may cause the player to malfunction or
prevent the battery from charging.

Using the dry battery

2

1

b

4

3

Insert a LR6 (size AA) alkaline dry battery.
To operate the player for the longest possible time, use the dry battery together
with a fully rechargeable battery.

Make connections and unlock the
HOLD control.

HOLD

HOLD

How to use the control on the remote control

Playback:  Turn the control towards 

N>

 while the player is stopped.

FF :  Turn and hold the control towards 

N> 

during playback.

REW: Turn and hold the control towards 

during playback.

AMS:  Turn the control towards 

N>

 or 

during playback.

N>

.

Adjusting the volume (VOL +/–)

+

+

VOL+

VOL–

Pull

Turn

Push back

Operating instructions

Portable MiniDisc Player

MZ-E505

Sony Corporation © 2002 Printed in Japan

3-238-528-12(1)

WARNING

To prevent fire or shock hazard, do not expose the
unit to rain or moisture.

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

To prevent fire, do not cover the ventilation of the apparatus with newspapers, table- cloths,
curtains, etc.  And don’t place lighted candles on the apparatus.

To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the
apparatus.

Certain countries may regulate disposal of the battery used to power this product.  Please consult with your
local authority.

Caution

The use of optical instruments with this product will increase eye hazard.

CAUTION — INVISIBLE LASER RADIATION WHEN OPEN

DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS

Information

IN NO EVENT SHALL SELLER BE LIABLE FOR ANY DIRECT, INCIDENTAL OR CONSEQUENTIAL
DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE
PRODUCT OR THE USE OF ANY PRODUCT.

Attach the dry battery case to the
player.

3

Insert the battery minus end first.

B

Various ways of
playback

Remote control

./N>

VOL +/–

HOLD

DISPLAY

SOUND

PLAYMODE

RPT/ENT

x

X

Player

GROUP

.

N>

Selecting the play mode

You can select from various play modes such
as shuffle play (SHUF), program play (PGM),
and repeat play (

).

This procedure can be done by the remote
control.

1

Press PLAYMODE repeatedly to select
one of the four play modes, as follows:

Play mode indication

Display

Play mode

(none)
(normal play)

1

(single play)

SHUF

(shuffle play)

PGM

(program play)

Listening to tracks in a desired
sequence (Program Play)

1

During playback, press PLAYMODE
repeatedly until “PGM” flashes in the
display.

2

Turn the control repeatedly to select a
track number.

3

Press RPT/ENT.
The track is entered.

4

Repeat steps 2 and 3 to select other
tracks in the desired sequence.

5

Hold down RPT/ENT for 2 seconds or
more.
The settings are entered and playback
starts from the first programmed track.

z

• The program play settings will remain in

memory even after playback finishes or is
stopped.

• You can set the program play up to 20 tracks.

To

Find the beginning of
the current track or
the previous track

3)

Find the beginning
of the next track

4)

Go backwards
while playing

Go forward
while playing

Pause

Remove the MD

2)

You can turn off the beep sound.  For more details, see “Turning off the beep sound.”

3)

If you turn the control towards 

.

 on the remote control (or press 

on the player) during the

first track of the disc, the player goes to the beginning of the last track on the disc.

4)

If you turn the control towards 

N>

 on the remote control (or press 

N> 

on the player) during

the last track of the disc, the player goes to the beginning of the first track on the disc.

5)

If you open the lid, the playback will begin from the beginning of the first track (except when group
mode is on).

Note

When removing the disc, make sure to press 

x

 first, and then slide OPEN.

Viewing the display window of the remote control

Track number Track name

6)

 or elapsed time of the track

6)

Appears only with MDs that have been electronically labeled.

z

• The player can play the track recorded by 2 

×

 or 4 

×

 long playing mode (LP2 or LP4).  Normal stereo

playback, LP2 stereo playback, LP4 stereo playback or monaural playback is automatically selected to
match the audio source.

• The display on the remote control will turn off shortly after you press 

x

.

Do this (Beeps

2)

 in the headphones)

Turn the control towards 

.

 on the remote control once

(three short beeps).
Press 

.

 on the player once.

Turn the control towards 

.

 on the remote control repeatedly

(continuous three short beeps).
Press 

.

 repeatedly on the player.

Turn the control towards 

N>

 on the remote control (two

short beeps).
Press 

N>

 once on the player.

Turn and hold the control towards 

.

 on the remote control.

Hold down 

.

 on the player.

Turn and hold the control towards 

N>

 on the remote control.

Hold down 

N>

 on the player.

Press 

X

 on the remote control (continuous short beeps).

Press 

X

 on the remote control again to resume play.

Press 

x

, and then slide OPEN.

5)

Make sure the CHARGE lamp turns on.

To 

i

 jack

1

2

to a wall outlet

Insert the battery minus end first

Connect firmly.

Playing an MD

Insert an MD.

1

2

3

Play an MD.

2

.

VOL +/–

GROUP

x

x

X

1

N>

N>

VOL+

VOL–

.

1

Turn the control towards 

N>

 on the remote control (or press 

N> 

on

the player) to play the disc.

A short beep sounds in the headphones/earphones when using the remote control.
The LED flashes and then lights up.

2

Pull and turn VOL +/– on the remote control (or press VOL +/– on the player)
to adjust the volume.

The volume indicator appears in the display, allowing you to check the
volume level.  After you adjust the volume, push back the control.

To stop play, press 

x

.

Playback starts from the point you last stopped playing.  To start playback from the
beginning of the disc, turn and hold the control towards 

N>

 on the remote control

(or hold down 

N>

 on the player) for 2 seconds or more.

1)

 The LED indicates the current operating status by the lighting up in the following colors.

When the battery power is exhausted, the LED starts flashing.  For more details, see
“When to replace or recharge the battery.”

LED color

Operating status

Red

Normal play (The LED lights up continuously)

Green

Group mode* (The LED lights up continuously)

Orange

Group skip mode* (The LED lights for about 5 seconds)

*For more details, see “Using the group function.”

1

2

Insert an MD with the label side facing up, pushing the
MD to the direction of the arrow in the illustration.

1

 Slide OPEN to open the lid.

2

 Insert an MD.

3

 Close the lid.

3 Color Info-LED

1)

3 Color
Info-LED

All the tracks are played
once.

A single track is played
once.

All the tracks are played
in random order.

Tracks are played in the
order that you specified.

Notes

• All program settings are lost when the lid is

opened.

• If no settings are made for 5 minutes while the

player is stopped, the settings made up to that
point are entered.

• If you turn on group mode during program

play, the program play is canceled.

Repeat play

You can use this function to repeat playback
in normal play, single play, shuffle play, or
program play mode.

1

Press RPT/ENT on the remote control
during playback.
“ ” appears in the display.

Repeat play indication

Searching for a specific
track or a position quickly

(Quick Search)

You can do two kinds of quick searches.

Index search

 — Searching quickly while

monitoring the track number or track name
(factory setting).

Time search

 — Searching quickly while

monitoring the elapsed time.

This procedure can be done by the remote
control.

1

During playback, press DISPLAY for 2
seconds or more.

2

Turn the control repeatedly until
“SEARCH” flashes in the display, and
press 

x

.

3

Turn the control repeatedly until
“Index” (index search) or “Time” (time
search) flashes in the display, and
press 

x

.

4

Press 

X

 to pause.

5

Turn and hold the control until the
desired track number/track name
(index search) or the desired elapsed
time (time search) appears in the
display.

6

Press 

X

 to cancel the pause.

z

• If you do this procedure while the player is in

shuffle play mode, shuffle play starts from the
track that you selected.

• If the player reaches to the first track or the last

track on the disc as you are turning the control
in step 5, it will return to the last track or the
first track, respectively. (In group mode, if the
player reaches to the first track or the last track
in a group as you are turning the control in step
5, it will return to the last track or the first track
in that group, respectively (see “Using the
group function”).

Track
number

Program number

Using the group function

The MZ-E505 can be used with a disc which
has group settings.
The group function is useful for playing a
great number of tracks, or tracks that have
been recorded in MDLP (LP2/LP4) mode.

What is a disc with group
settings?

This is a disc with settings that organize
tracks into groups, and which allow those
groups to be selected.
The MZ-E505 does not support the recording
of group settings. Use your MD recorder to
record group information, and then use the
MZ-E505 for playback.

1 2 3

7 8

5 6

4

z

If your recorder has a function for editing disc
names, you can use it to register groups.  For
details, refer to “Registering groups using your
minidisc recorder.”

Listening to tracks in a specific
group (Group Mode Playback)

Playback when group mode is off:
Playback starts with the first track in the
disc, and stops with the last track in the
disc.

1 2 3

7 8

5 6

4

Playback when group mode is on:
Playback of the selected group starts with
the first track in the group, and stops with
the last track in the group.

1 2 3

1 2

1 2

On the remote control

1

Insert a disc which has group settings
into the player, and then play the disc.

2

Press DISPLAY for 2  seconds or more.

3

Turn the control repeatedly until
“GROUP” flashes, and then press 

x

.

4

Turn the control repeatedly until
“GROUP ON” flashes, and then press

x

.

“G” appears in the display and group
mode is turned on.  To turn off group
mode, Select “GROUP OFF” and press

x

.

On the player

1

Insert a disc which has group settings
into the player, and then play the disc.

2

Press GROUP for 2 seconds or more.
The LED lights up green and group
mode is turned on.  To turn off group
mode, press GROUP for 2 seconds or
more again.  The LED lights up red.

z

• When group mode is on, it is possible to do

repeat play, shuffle play, or program play.  For
details on the respective operations, see
“Selecting the play mode.”

• In group mode, turning the controls on the

remote control towards 

N>

 during

playback of the last track of a group moves
playback to the first track of the group.
Turning the control 2 times on the remote
control towards 

.

while playing the first

track of a group moves playback to the last
track of the group.

Note

In group mode, the player treats all tracks
without group settings as belonging to the last
group on the disc.  The last group is indicated in
the display on the player as “Gpoup – –.”  Within
a group, the tracks appear in their order on the
disc, not their order within the group.

Selecting and playing specific
groups (Group Skip Function)

When playing a disc with group settings, the
group skip function allows you to jump from
the currently playing group to any other
group on the MD.  The group skip function
can be used even though the player is not in
group mode.

When group mode is off:

1 2 3

7 8

5 6

4

When group mode is on:

1 2 3

1 2

1 2

On the remote control

1

Insert a disc which has group settings
into the player and play the disc.

2

Hold down PLAYMODE until
“– – –” in the display.
The player enters group skip mode.

3

Within 5 seconds, turn the control
repeatedly until the name or number
of the desired group appears.

When there is a group name (Example: AAA)

Group name

When there is no group name

Group number

On the player

1

Insert a disc which has group settings
into the player and play the disc.

2

Press GROUP.
The LED lights up orange and the
player enters group skip mode.

3

Within 5 seconds, press 

.

 or

N>

 repeatedly until the name or

number of the desired group appears.

Note

If no operation is performed within 5 seconds in
step 3, group skip mode is cancelled.  To do the
procedure, start from step 2 again.

Registering groups using your
minidisc recorder

If your MD recorder  (MD deck or recording
MD Walkman) has a function for editing disc
names, you can use it to register groups even
if your recorder does not have the group
function.
Make sure you enter the text string exactly as
described below.  The group function will not
work if you enter the text string incorrectly.

To specify groups

1

Change the disc name to the following
by using your MD recorder:

3

Turn the control repeatedly to adjust
the bass or the treble.

Example:  While adjusting the bass,
the cursor moves. (Position: –2)

–4

±0

+3

The sound can be adjusted in eight
steps, from –4 to +3.

To set the other digital sound preset,
press SOUND to select “SOUND1” or
“SOUND2,” and then do steps 2 and 3.

4

Press RPT/ENT.
The sound settings are stored and the
playback display appears again.

To select a preset sound

Press SOUND repeatedly to select
“SOUND1,” “SOUND2.”
Selecting no display turns off the digital
sound preset function.

z

You can set a preset sound while playback is
paused.

Note

When using a digital sound preset, the sound
may break or become distorted if the volume is
turned up too high, depending on the settings or
the track.

B

Other operations

Viewing the track name
and playing time

You can check the track or disc name, track
number, the elapsed playing time of the
current track, the number of the tracks
recorded on the MD, the group name, and the
total number of 

 

tracks in a group.

B

A

1

Press DISPLAY on the remote control.

Each time you press DISPLAY, the
display changes as the follows:

A

Track number

Track number

The number of total
tracks in the group

The number of
total tracks

Track number

z

The group name appears when you select the
group on group skip mode.  For more details, see
“Selecting and playing specific groups” in
“Using the group function.”

Notes

• Depending on whether group mode is on or

off, the operating conditions, or the settings
may not be selectable or the indications that
appear may vary.

• The track mode indication appears only during

playback.  It appears for 2 seconds, and is then
replaced by the elapsed time of the current
track.

“WALKMAN” is a trademark of  Sony Corporation.

Play/FF/AMS

REW/AMS

Disc

Track number

skip

skip

skip

Disc

Group 1

Group 2

Group 3

Track
number

Track
number

Track
number

skip

skip

skip

to DC IN 3V

AC power
adaptor

Insert the prongs until they are
firmly attached.

Group 1

Group 2

Group 3

Track
number

Track
number

Track
number

Disc

Track number

Disc

Group 1

Group 2

Group 3

Track
number

Track
number

Track
number

Disc

Connect firmly.

0;[Disc name] // [First track of group 1 ]-

[Last track of group 1] // [Name of group 1 ]-

[First track of group 2] // [Last track of group 2 ]-

A

B

B

[Name of group 2] // ......

B

B

C

C

A

Disc name

B

Track number

C

Group name

// Separator between group names
;

Separator between track number and
Group name

(Ex.) Set the following groups for the disc
named “Collections ”:
Group name for tracks 1-7:

My Favorites“2001winter”

Group name for tracks 8-17:

Jun&Tac“sunshine head”

Group name for tracks 18-24:

THE NIGHT BUTTERFLYS

Group name for tracks 25-32:

Dream World/Kiss Me!

Text string entered :

0;Collections//
1-7; My Favorites“2001winter”//
8-17;Jun&Tac“sunshine head”//
18-24;THE NIGHT BUTTERFLYS//
25-32;Dream World/Kiss Me!//

z

• Up to 99* groups can be registered on a single

MD.

• The characters “;”, “/”, and “–” can be used in

a group name.

• You can register the same group name more

than twice on the same MD.

• You can specify a group without entering a

group name (

C

) for it.

* The actual number depends on the editing

ability of your recorder and may be less than 99
in some cases.

Note

Depending on the specifications of your MD
recorder, the group function will not work .

Adjusting the sound quality

(Digital Sound Preset)

You can emphasize the treble and bass to suit
your taste.  The player can store two sets of
treble-bass adjustments, which can set be
selected later during playback.
This procedure can be done by the remote
control.

To select the sound quality

Factory settings

The factory settings of each digital sound
preset are as follows:
• “SOUND1”:  bass +1, treble ±0
• “SOUND2”:  bass +3, treble ±0

1

During playback, press SOUND
repeatedly to select “SOUND1” or
“SOUND2.”

To adjust the sound quality

1

During playback, press SOUND
repeatedly to select “SOUND1” or
“SOUND2.”

2

Press SOUND for 2 seconds or more.
The player changes to the bass-setting
mode.  Pressing  SOUND for 2 seconds
or more again changes the player to
the treble-setting mode.

When you select bass-setting mode,
“B” appears.  When you select treble-
setting mode, “T” appears.

B

The elapsed time

Track name

Group name

Disc name

Track mode

Reviews: