background image

English

WARNING

To prevent fire or shock hazard, do not expose the unit
to rain or moisture.

Owner’s Record

The model number and the serial number are located inside the battery
compartment of the mouse. Record the serial number in the space provided
below. Refer to this number whenever you call your Sony dealer regarding this
product.

Model No. VGP-BMS30
Serial No. ____________________

For customers in the U.S.A.

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

The shielded interface cable recommended in this manual must be used with this
equipment in order to comply with the limits for a digital device pursuant to
subpart B of Part 15 of the FCC Rules.
You are cautioned that any changes or modifications not expressly approved in
this manual could void your authority to operate this equipment.
For questions regarding your product or for the Sony Service Center nearest you,
call 1-888-476-6972 in the United States or 1-800-961-7669 in Canada.
The number below is for FCC related matters only.

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.

FCC Radiation Exposure Statement:
These products comply with FCC radiation exposure limits set forth for
uncontrolled equipment and meet the FCC radio frequency (RF) Exposure
Guidelines in Supplement C to OET65. These products have very low levels
of RF energy that it is deemed to comply without testing of specific
absorption ratio (SAR).

For customers in Canada

This Class B digital apparatus complies with Canadian ICES-003.

Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any
interference received,
including interference that may cause undesired operation of the device.

To prevent radio interference to the licensed service, this device is intended
to be operated indoors and away from windows to provide maximum
shielding. Equipment (or its transmit antenna) that is installed outdoors is
subject to licensing.

IC Exposure of Humans to RF Fields

The installer of this radio equipment must ensure that the antenna is
located or pointed such that it does not emit RF field in excess of Health
Canada limits for the general population; consult Safety Code 6, obtainable
from Health Canada’s website:
www.hc-sc.gc.ca/rpb.

• VAIO and 

 are trademarks of Sony Corporation.

• Microsoft and Windows are registered trademarks of Microsoft Corporation

in the United States and/or other countries.

• The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and

any use of such marks by Sony Corporation is under license. Other
trademarks and Trade names are those of their respective owners.

• All other names of systems, products, and services are trademarks of their

respective owners. In this manual, the ™ or ® marks are not specified.

In this manual, Microsoft

®

 Windows

®

 XP Home Edition and Microsoft

®

Windows

®

 XP Professional are referred to as Windows XP.

Before Use

This product is a wireless mouse equipped with Bluetooth* technology.
The Bluetooth

®

 Wireless Mouse can be used with the following notebooks

(as of September 2005):
• The following Sony VAIO notebooks** equipped with Bluetooth

technology and pre-installed with Microsoft

®

 Windows

®

 XP Professional

or Microsoft

®

 Windows

®

 XP Home Edition:

PCG-Z1 series, PCG-TR series, and VGN series notebooks

• Sony VAIO notebooks with the Sony PCGA-BA2 or PCGA-BA1/A

Bluetooth Adaptor (not supplied) connected

* Bluetooth

®

 technology

Bluetooth wireless technology provides instant short-range connectivity
without the need for cumbersome cabling. For details, refer to the
manuals included with your notebook or the operating instructions for
your Bluetooth adaptor.

** Windows Service Pack 2 must be installed. Check the OS you are using

and update accordingly.

Note

Depending on the notebook, Bluetooth adaptor, or version of software you are
using, the mouse may not operate correctly.
Consult your nearest Sony dealer about proper operating environments and
information about Sony VAIO and Bluetooth compatibility.

Checking to see if Windows XP Service Pack 2 is
installed

1

Click “Start” in Windows and select “Control Panel”.

2

In the “Control Panel”, click “Performance and
Maintenance” and then click “System”.

3

Click the “General” tab in the “System Properties”
screen.

If “Service Pack 2” is displayed, Windows XP Service Pack 2 is
installed in your notebook.

Installing Windows XP Service Pack 2

If Windows XP Service Pack 2 is not installed on your notebook, download
it from the Microsoft website (http://www.microsoft.com).

Names of Parts

Inserting Batteries into the
Mouse

1

Set the power switch located on the bottom of the
mouse to OFF.

2

Open the battery compartment cover.

3

Insert the two supplied IEC R6 (size AA) batteries with
the c - orientation.

Note

To prevent battery fluid leaks and damage, observe the following
precautions.
• Insert the batteries with the c - orientation.
• Do not charge dry cell batteries.
• Do not mix old and new batteries, or batteries of a different type.
• If the mouse has not been used for a long time, remove the batteries.
• If a battery fluid leak occurs, carefully wipe the battery compartment,

and insert new batteries.

• To prevent accidental operation, be careful not to press any buttons

when replacing the batteries.

4

Close the battery compartment cover.

z

Under normal operating conditions, a set of alkaline batteries lasts about
two months. When cursor movement becomes sluggish and the
communication distance between the mouse and your notebook decreases,
check the low battery lamp on the mouse. Replace the batteries if the low
battery lamp is flashing red.
When not using the mouse, set the power switch to OFF. This will make the
batteries last longer.

Replacing the batteries

The low battery lamp flashing red indicates that the battery life is running
low. Replace the batteries when this occurs.

Enabling Communication
between the Mouse and Your
Notebook

The Bluetooth function in Windows XP is used to enable communication
between the mouse and your notebook. If your notebook is provided with
the Bluetooth Utility software, use the software to enable communication.

z

 Hint

Operation of the Bluetooth Utility software may vary depending on your
notebook. For details on how to use the software, refer to the manuals provided
with your notebook.

Using the function in Windows XP to
enable communication
1

Turn your notebook on.

2

Set the power switch on the bottom of the mouse to ON.

3

Activate the wireless function on your notebook.

For details, refer to the operating instructions and manuals provided
with your notebook.

4

Click the “Start” button in Windows and select “Control
Panel”.

5

Click “Network and Internet Connections”, and click
“Bluetooth Devices”.

6

Click “Add” under the “Devices” tab.

The “Add Bluetooth Device Wizard” appears.

7

Press the CONNECT button on the bottom of the mouse.

8

Select the “My device is set up and ready to be found.”
check box.

9

Click “Next”.

Search for Bluetooth devices begins.

10

Select “VGP-BMS30” from the “Select the Bluetooth
device that you want to add.” list, and click “Next”.

11

Select “Don’t use passkey”, and click “Next”.

12

Click “Finish”.

Try moving the mouse. If the pointer displayed on your screen moves
in the same direction, the connection is complete.

Disconnecting

Set the power switch of the mouse to OFF.

Using the Bluetooth Utility software to
enable communication
1

Turn your notebook on.

2

Set the power switch on the bottom of the mouse to ON.

3

Activate the wireless function on your notebook.

For details, refer to the operating instructions and manuals provided
with your notebook.

4

Double-click the 

 icon in the notification area on the

bottom right corner of your notebook’s desktop.

The Bluetooth Utilities software starts up, and the “Bluetooth Settings”
screen displays.

5

Click “New Connection”.

The “Add New Connection Wizard” screen appears.

6

Press the CONNECT button on the bottom of the mouse.

7

Select “Express Mode”, and click “Next”.

Search for Bluetooth devices begins.

8

In the device list, select “VGP-BMS30”, and click “Next”.

9

Click “OK” when a message appears telling you to do so
once you are ready to connect the HID device.

10

Verify the contents of the screen displayed, and click
“Next”.

11

Click “Finish”.

Try moving the mouse. If the pointer displayed on your screen moves
in the same direction, the connection is complete.

Disconnecting

Right click the headset icon displayed in the “Bluetooth Settings” screen,
and click “Disconnect” in the displayed menu.

Operating distance of the mouse

The mouse can normally be operated within about a 32 ft. (10 m) radius
around the notebook. Depending on the usage environment, sometimes the
usable distance may be notably shorter, preventing normal operation.
In such a case, take the following measures:
• Use the mouse as far away from other wireless devices as possible.
• Use the mouse closer to the notebook.
• Use a mouse pad.

Using the USB Mouse

When you move the mouse, the pointer displayed on your screen moves in
the same direction.
This section describes basic mouse operations and how to use the wheel
button.

Notes

• An optical mouse senses mouse movement by using the optical sensor to

detect the shadows caused by the red light on the bottom of the mouse. The
optical mouse may not operate correctly on the following surfaces:
– Transparent surfaces (such as glass)
– Surfaces that reflect light (such as highly polished veneers or mirrors)
– Surfaces with a repetitive pattern, such as screening (like that used for

printing photos in magazines and newspapers)

– Surfaces that are striped or have another distinct, high contrast pattern
If the mouse pointer does not move smoothly across the screen, make sure
you are not using the mouse on one of the above mentioned surfaces.

• The fluoropolymer used for the soles of the mouse (PTFE, or

polytetrafluoroethylene) is designed for low frictional resistance, but the
mouse may slide differently depending on what material your desk or
mousepad is made of.

z

If necessary, you can adjust the mouse pointer speed under “Mouse Properties”.
To display “Mouse Properties”, double-click “Mouse” in the “Control Panel”
(with the Windows XP operating system, select “Printers and Other Hardware”
in the “Control Panel”, then select “Mouse”).

Basic operations

1

3

2

1

Wheel button

Use the wheel button to easily scroll up and down in a window. You can
also use auto scroll by pressing the wheel button.

2

Left button

Use to open saved documents, pictures and other files and to run programs.
Most mouse functions are performed using this button.

3

Right button

Use this button to display shortcut menus that allow you to copy saved
documents, pictures and other files, view file details, and access various
commands and settings.

Precautions

Safety

If any solid object or liquid falls onto the mouse, disconnect
it and have it checked by qualified personnel before
continuing its use.

Location

Do not place the mouse in a location where it is:
• On an unstable surface
• In very humid areas or where there is no ventilation
• Subject to excessive dust
• Subject to direct sunlight or extreme heat
• Extremely cold

Operation

If the mouse is brought directly from a cold to a warm
location or is placed in a very damp room, moisture may
condense on the inside of the mouse. If this occurs, the
mouse may not work properly.
In this case, wait about 30 minutes for the moisture to
evaporate. If the mouse does not work properly after one
hour, consult your nearest Sony dealer.

Bluetooth communications

• The 2.4 GHz band used by Bluetooth and wireless LAN devices is also

used by various other devices. Bluetooth devices incorporate technology
that minimizes interference from other devices using the same
wavelength. However, communication speed and achievable distances
may be reduced. Interference from other devices can also stop
communications altogether.

• The data transfer rate will vary depending on distance and obstacles

between devices, device configuration, radio interference, operating
system, software application, and so on. In some cases, communication
may be interrupted.

• Communication range will vary according to whether walls or other

obstacles are located between devices, the material used in walls, the
presence of radio frequency interference and other environmental
conditions, and the type of software being used.

• If wireless LAN and Bluetooth functionality are used at the same time on

the same notebook, communication speed may be reduced due to
electromagnetic interference, and other unwanted effects may occur.

Cleaning the outside of the mouse

Clean the mouse with a soft, dry cloth or a soft cloth lightly moistened with
a mild detergent solution. Do not use any type of abrasive pad, scouring
powder, or solvent such as alcohol or benzine.

Specifications

Communication method

Bluetooth Standard Ver. 1.2

Position tracking principle

Optical sensor

Resolution

800 counts per inch

Frequency band

RF 2.4 GHz (Bluetooth)

Power requirements

3 V DC (two manganese IEC R6 [size AA]
batteries)

Transmission distance

32 ft. (10 m) max. line of sight*

1

Dimensions

Approx. 2.1 

×

 1.2 

×

 4.9 in.

(53.4 

×

 31.5 

×

 124.6 mm) (w 

×

 h 

×

 d)

Mass

Approx. 3.9 oz. (110 g) (including batteries)

Supported models

Sony VAIO notebooks with the Windows XP
operating system.

Operating temperature

41°F to 95°F (5°C to 35°C)
(temperature gradient less than 18°F (10°C)/
hour)

Bluetooth

®

 Wireless Mouse

VGP-BMS30

Operating Instructions
Mode d’emploi

© 2005 Sony Corporation  Printed in Japan

2-653-693-

11

(1)

Operating humidity

20% to 80% (not condensed), provided that
humidity is less than 65% at 95°F (35°C)
(hygrometer reading of less than 84°F (29°C))

Storage temperature

–4°F to 140°F (–20°C to 60°C)
(temperature gradient less than 18°F (10°C)/
hour)

Storage humidity

10% to 90% (not condensed), provided that
humidity is less than 20% at 140°F (60°C)
(hygrometer reading of less than 95°F (35°C)

Accessories

Manganese IEC R6 (size AA) batteries*

2

 (2)

Operating Instructions (this document) (1)
Warranty Card (1)

*

1

Communication range will vary according to whether walls or other
obstacles are located between devices, the material used in walls, the
presence of radio frequency interference and other environmental
conditions, and the type of software being used.

*

2

The supplied batteries are for testing purposes only. You can use the
mouse longer by using alkaline batteries.

Design and specifications are subject to change without notice.

Troubleshooting

If you experience any of the following difficulties while using the mouse,
use this troubleshooting guide to solve the problem. If a problem persists,
consult your nearest Sony dealer.

The mouse does not turn on when I set the power switch to ON.

Your notebook is in power-saving mode or is not turned on.

c

Unless your notebook is turned on and not running in power-saving
mode, the mouse will not turn on, even when the power switch is set to
ON. To turn the mouse on, set the power switch on the mouse to ON, and
press the CONNECT button once.

Other mouse buttons are being pressed while the power switch is set to
ON.

c

If the power switch is set to ON while other mouse buttons are being
pressed, the mouse will not turn on. Be sure not to press any other
buttons when setting the power switch to ON.

Nothing happens when I press a mouse button.

If you are using a Bluetooth adaptor, the Bluetooth adaptor is not
connected properly to the USB port.

c

Close all programs, and then reconnect the Bluetooth adaptor to your
notebook.

The operating system is not compatible.

c

Use a supported operating system.

The mouse batteries are exhausted.

c

Replace the batteries. For details, see “Inserting Batteries into the Mouse”.

The mouse and the notebook are not communicating.

c

 Perform the steps in “Enabling Communication between the Mouse and

Your Notebook” to ensure that proper communication is possible.

c

Turn off the mouse, wait a few seconds, turn on the mouse, and then
reestablish communication.

c

 In some operating environments, the usable distance may be notably

shorter, preventing normal operation. In such case, use the mouse farther
away from other electronic devices such as other computers and displays.

c

 If the mouse is too far from your notebook, communication is not

possible. Bring the mouse and your notebook closer together.

The mouse is being used on an unsuitable surface.

c

 When used on a mirror, glass, or other shiny surface, or on a transparent

or strongly patterned surface, the sensor on the bottom of the mouse may
not be able to correctly detect the mouse movements. On such surfaces,
use a mouse pad.

The CONNECT button is pressed while operating the mouse.

c

 When the CONNECT button is pressed while operating the mouse, the

mouse goes into a standby state for about 3 minutes and cannot be
operated during this time. If you press the CONNECT button, wait a few
minutes before beginning operation.

The mouse may have difficulty communicating in an environment with
2.4 GHz wireless LAN or other Bluetooth communication.

c

 It is best to use the mouse in a location with low interference from

wireless devices.

Pressing the CONNECT button does not establish a connection.

c

Check whether batteries are inserted in the mouse. For details, see
“Inserting Batteries into the Mouse”.

c

If the power switch on the mouse is set to OFF, communication with the
notebook is not possible. Check the power switch setting on the bottom of
the mouse.

c

If the power does not come on when the power switch is set to ON, the
batteries may be exhausted. Under normal operating conditions, a set of
alkaline batteries lasts about two months. Replace the batteries. For
details, see “Inserting Batteries into the Mouse”.

c

Communication between the mouse and your notebook may not have
been properly established. If the CONNECT button on the mouse is not
pressed within 30 seconds after the Bluetooth device search begins,
mouse communication is cancelled. In such a case, perform the procedure
again to enable communication. For details, see “Enabling
Communication between the Mouse and Your Notebook”.

c

If the mouse and notebook are too far apart, communication is not
possible. The maximum communication distance between the mouse and
notebook is about 32 ft. (10m). If used on a metal table or if obstacles lie
between the mouse and notebook, the usable distance may be less.

The scrolling features do not work.

The operating system is not compatible.

c

Use a supported operating system.

The program you are using is not compatible with the scrolling
features.

c

The scrolling features only work with programs that use a scroll function.

c

Some programs do not support the scrolling features.

If you are using a Bluetooth adaptor, after the adaptor was installed
while in the power-saving mode, the notebook was returned to normal
mode.

c

Turn off the mouse, wait a few seconds, turn on the mouse, and then
reestablish communication.

The pointer does not move when I move the mouse.

c

Processing performed by Windows or other software may temporarily
disable the mouse. Wait a few moments for the processing to finish
before using the mouse.

c

You may find some useful solutions in your notebook’s operating
instructions. Refer to the manuals provided with your notebook.

The mouse batteries are exhausted.

c

If the power does not come on when the power switch is set to ON,
replace the batteries. For details, see “Inserting Batteries into the Mouse”.

The mouse is not set to ON.

c

 Set the power switch on the bottom of the mouse to ON.

The mouse and your notebook are not communicating.

c

 Perform the steps in “Enabling Communication between the Mouse and

Your Notebook” to ensure that proper communication is possible.

c

 In some operating environments, the usable distance may be notably

shorter, preventing normal operation. In such case, use the mouse farther
away from other electronic devices such as other computers and displays.

c

 If the mouse is too far from your notebook, communication is not

possible. Bring the mouse and your notebook closer together.

The mouse is being used on an unsuitable surface.

c

When used on a mirror, glass, or other shiny surface, or on a transparent
or strongly patterned surface, the sensor on the bottom of the mouse may
not be able to correctly detect the mouse movements. On such surfaces,
use a mouse pad.

When I am using the mouse, the display goes dark or the notebook
enters power-saving mode.

The notebook enters power-saving mode even while a USB device is in
use.

c

Change the power management settings for the notebook to prevent it
from entering power-saving mode. For details, refer to the manuals
provided with your notebook.

c

Touch the touchpad or press any key on the keyboard to exit power-
saving mode.

The notebook does not return from Standby mode.

c

Touch the touchpad or press any key on the keyboard to exit this mode.

The mouse pointer does not move smoothly across the screen.

c

The optical mouse distinguishes movement by reflecting the red light
from its base off surfaces and detecting shadows with an optical sensor.
The optical mouse may not operate correctly on the following surfaces:
- Transparent surfaces (such as glass)
- Surfaces that reflect light (such as glossy plastics or mirrors)
- Surfaces with a repetitive pattern, such as screening (like those used for

printing photos in magazines and newspapers)

- Surfaces that are striped or have another distinct, high-contrast pattern
If the mouse pointer does not move smoothly across the screen, make
sure you are not using the mouse on one of the surfaces listed above.

Exiting power-saving mode with the mouse takes a long time or is not
possible.

c

Press any key or the power button on the keyboard.

The mouse does not move smoothly after returning from the power-
saving mode.

c

Deactivate the Bluetooth connection, wait a few seconds, and then
reestablish connection.

The mouse is not found when the Bluetooth device search is
performed.

The mouse is unable to be detected.

c

Press the CONNECT button on the mouse, and then try the search again.

I am asked to input a key at the time of authentication.

c

Input “0000” as the key.

Printed on 100% recycled paper using VOC (Volatile Organic
Compound)-free vegetable oil based ink.

Imprimé sur papier 100 % recyclé avec de l’encre à base
d’huile végétale sans COV (composés organiques volatils).

Low battery lamp

Left button

CONNECT button

Power switch

Right button

Wheel button

Reviews: