background image

SERVICE MANUAL

Sony Corporation

Personal Audio Division
Published by Sony Techno Create Corporation

US Model

Canadian Model

INTEGRATED REMOTE COMMANDER

9-887-164-02

2006I16-1
© 2006.09

Ver. 1.1  2006.09

SPECIFICATIONS

RM-AX1400

Operating distance

Supplied accessories

Approx. 32.8 ft. (10 meters) (varies depending
on components of different manufacturers)

Power requirements

Remote control and button illumination:
Two size AA (R6) batteries

Battery life

Approx. 5 months (a Sony TV turned on/off
up to approx. 300 times per day)

Dimensions

Approx. 2 

1

/

×

 9 

×

 1 

3

/

16

 in. (w 

×

 h 

×

 d)

(60.4 

×

 227.5 

×

 29.4 mm)

Mass

6 oz. (170 g) (not including batteries)

Learnable signals

*

Capacity per signal: up to 300 bit
Signal frequency range: 455 kHz and up to
300 kHz
Signal interval: up to 1 second

*

Some signals cannot be learned by the
Remote Commander, even though the signals
comply with these specifications.

Design and specifications are subject to change
without notice.

• Dedicated USB cable (1)
• CD-ROM* (1)

– AX1400 Remote Editor software
– Operating Instructions (PDF file)

• Operating Instructions (1)
•Warranty Card (1)

* Do not attempt to play this CD-ROM in an

audio CD player.

Summary of Contents for RM-AX1400 - Home Theater Remote Control





























Reviews: