LAN1-ALERT-LAN2 ONLINE
CAMERA
1080 60P
I
N
O
U
T
HDMI
DVI-I OUT
ISDN UNIT
AUX CONTROL
MAINTENANCE
REC OUT
L
R
L
R
L
R
L
R
AUDIO OUT
AUDIO 2 IN
AUDIO 1 IN
MIC(A1)
1(R)
2(R)
3(R)
4(L)
5(L)
2
6(L)
DVI-I 1
DVI-I 2(PC)
HDMI-2
HDMI-1
1
DVI cable
5)
HDMI
cable
5)
to DC 12V
Camera cable
1)
to HDMI
to VISCA
IN
to DVI-I 2
(PC) IN
to HDMI IN
to CAMERA
4-455-814-
13
(1)
HD Visual Communication System
PCS-XG100/XG77/XG100S/XG77S
Installation Guide
© 2013 Sony Corporation
Printed in China
Connections
Continued on
reverse side
Notes
Be sure to turn off all the equipment before making any connections.
ˎ
Do not connect/disconnect the camera cable, interface cable, or pen
ˎ
tablet with the power on. Doing so may damage the camera unit,
Communication System, or ISDN unit.
For safety, do not connect the 1000BASE-T connector to a network
ˎ
that will apply excess voltage to this connector.
When used with an ISDN unit for the first time,
ˎ
the
Communication System may automatically upgrade the software
of the connected equipment. Follow the instructions on the
monitor screen to upgrade the software. Do not turn off the
Communication System or disconnect the cable during upgrade.
Doing so may cause a malfunction of the system.
ISDN support is planned for version 2.0.
ˎ
SRG-120DH
HD Camera Unit
3)
TV monitor
5) 6)
ISDN unit
5)
Interface
cable
(supplied
with ISDN
unit)
1)
Supplied
2)
Supplied (two PCS-A1 microphones are supplied with the
PCS-XG100/XG100S, and one is supplied with the PCS-XG77/XG77S)
3)
Supplied with the PCS-XG100/XG77
4)
Supplied (Japan only)
5)
Not supplied
6)
Output to HDMI monitors under default settings. When outputting to a non-HDMI monitor,
refer to the “To change the ‘Monitor Output’ setting” section on the reverse side.
PCSA-B384S
5)
to ISDN 1 to 3
or
PCSA-B768S
5)
to ISDN 1 to 6
ISDN modular cable
5)
to DC 19.5 V
Power cord
4)
Computer
Projector, etc.
HDMI cable
1)
to HDMI IN
UTP cable (category 6,
straight)
5)
VCR, etc.
to MIC (A1) 1 (R) / 4 (L)
PCS-A1 microphone
2)
Connecting two microphones allows pickup
of stereo sound.
LAN
Notes
The PCS-XG77/XG77S is not equipped with the following connectors
ˎ
and indicators:
HDMI IN, HDMI-2 OUT, and
2 connectors, and LAN 2 ALERT indicator
On the PCS-XG77/XG77S, the
ˎ
1 connector is named the
connector, and the LAN 1 ALERT indicator is named the LAN ALERT
indicator.
Normally, connect the UTP cable to the
ˎ
1 connector (indicated in
green). If the UTP cable is connected to the
2 connector, some of the
functions of the system may be restricted.
For details, refer to the Operating Instructions supplied with the system.
The REC OUT jack is used to make an audio recording of a
ˎ
communication, for example. It is not used during regular
communication.
We recommend using Sony’s HDMI cable.
ˎ
ISDN
line
Front
Rear
to power outlet
to
1
AC adaptor
1)
to TERMINAL
to ISDN UNIT
to DVI-I
OUT
to HDMI-1
OUT
to
(USB) port
DVI cable
5)
Pen tablet
5)
(Wacom)
