background image

SERVICE MANUAL

Sony Corporation

Published by Sony Techno Create Corporation

HBD-TZ130

SPECIFICATIONS

DVD RECEIVER

9-889-971-03

2011A04-1

© 

2011.01

US Model

Canadian Model

E Model

Australian Model

Chinese Model

Ver. 1.2  2011.01

•  HBD-TZ130 is the ampli

fi

 er, DVD/CD and tuner 

section in DAV-TZ130.

Model Name Using Similar Mechanism

NEW

DVD Drive Mechanism Type

CDM85

Optical Pick-up Name

KHM-313

This system incorporates with Dolby* Digital and Dolby Pro Logic 
adaptive matrix surround decoders.
*  Manufactured under license from Dolby Laboratories.
  Dolby, Pro Logic, and the double-D symbol are trademarks of 

Dolby Laboratories.

This system incorporates High-De

fi

 nition Multimedia Interface 

(HDMI™) technology.
HDMI, the HDMI logo and High-De

fi

 nition Multimedia Interface are 

trademarks or registered trademarks of HDMI Licensing LLC.
“BRAVIA” is a trademark of Sony Corporation.
MPEG Layer-3 audio coding technology and patents licensed from 
Fraunhofer IIS and Thomson.
Windows Media is a registered trademark of Microsoft Corporation in 
the United States and/or other countries.

– Continued on next page –

AUDIO POWER SPECIFICATIONS
for the U.S. models

POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(FTC)
Front L + Front R 

With 3 ohms loads,

 

both channels driven,

 

from 180 - 15,000 Hz;

 

rated 23 watts per

 channel 

minimum

 

RMS power, with no

 

more than 1% total

 harmonic 

distortion

 

from 250 milli watts to

 rated 

output.

Ampli

fi

 er Section

POWER OUTPUT (rated):
Front L + Front R 

32 W + 32 W (at 3

 

ohms, 1 kHz, 1% THD)

POWER OUTPUT (reference):
 

Front L/Front R/

 Surround 

L/Surround

 

R: 43 watts (per channel 

 

at 3 ohms, 1 kHz)

 

Center: 89 watts (per

 

channel at 6 ohms, 1 kHz)

 

Subwoofer: 89 watts (at

 

6 ohms, 100 Hz)

Inputs

TV/CABLE :  

Pin jack

CD/DVD System

Laser Diode Properties
 Emission 

Duration:

 Continuous
 

Laser Output*: Less

 than 

1,000 

μ

W

*  This output is the value measurement at a dis-

tance of 200 mm from the objective lens sur-
face on the Optical Pick-up Block with 7 mm 
aperture.

USB Section

 (USB) port:

Maximum current: 

500 mA

Summary of Contents for HBD-TZ130





























Reviews: