background image

SERVICEMANUAL

US Model

SPECIFICATIONS

Printing system

Sublimation heat transfer printing

(Yellow/Magenta/Cyan overlay)

Effective pixels

448 (V) x 640 (H) dot

Printing size

3   (V) x 4 

 

(H) inches

(85 x 113 mm)

Gradations

256 levels (8 bits),
Approx. 

 colors

Printing time (excluding data transmission time)

Approx. 70 seconds per sheet

Input/output connectors

Centronics Parallel Interface
Mini DIN 

 Serial Interface

Infrared port

Video Print Cartridge and Video Print Paper

Video Print Cartridge for regular

and sticker print paper for use only

with PRINTERS bearing the VP

trademark.

Video Print Paper for use only with

PRINTERS bearing the VP
trademark (4 x 5 

 inches (100 x

 mm)/sheet)

Power requirements

120 V AC, 60 Hz, 

Operating temperature

40°F to 95   (5°C to 35 “C)

Operating humidity

20   to 80 

Dimensions

Approx. 10   x 2   x 9   inches
(w/h/d, excluding protruding

parts) (274 x 65.5 x 242 mm)

Mass

Approx. 5 lb 8 oz (2.5 kg)

Supplied accessories

 Power cord (1)

CD-ROM (for Windows 95 and Macintosh) (1)

User’s Guide (for Windows 95) (1)

 User’s Guide (for Macintosh) (1)
 Print paper and cartridge (1 set)

Design and specifications are subject to change without
notice.

Summary of Contents for DPP-M55 Marketing






































Reviews: