background image

DECHJ00AS / DECHSJ00A  3-452-573-

12

 (1)  

OTF

Debugging Station (for PLAYSTATION

®

3)

Instruction Manual

DECHJ00A / DECHJ00AS / DECHSJ00A

                                              

3-452-573-

12

(1)

WARNINGS

•  To avoid electrical shock, do not open the cabinet. Refer servicing to qualifi ed personnel only.
• CAUTION

– Use of controls or adjustments or performance of procedures other than those specified herein may 

result in hazardous radiation exposure.

– The use of optical instruments with this product will increase eye hazard.

•  This appliance is classifi ed as a CLASS 1 LASER product under IEC60825-1+A2:2001.

CLASS 1 LASER PRODUCT
LASER KLASE 1
LUOKAN 1 LASER LAITE
KLASS 1 LASERAPPARAT

Photosensitivity/Epilepsy/Seizures

A very small percentage of individuals may experience epileptic seizures or blackouts when exposed to 
certain light patterns or flashing lights. Exposure to certain patterns or backgrounds on a television 
screen or when playing video games may trigger epileptic seizures or blackouts in these individuals. 
These conditions may trigger previously undetected epileptic symptoms or seizures in persons who 
have no history of prior seizures or epilepsy. If you, or anyone in your family, has an epileptic condition 
or has had seizures of any kind, consult your physician before playing.

IMMEDIATELY DISCONTINUE use and consult your physician before resuming gameplay if you or your 
child experience any of the following health problems or symptoms:
• dizziness,
• altered vision,
•  eye or muscle twitches,
•  loss of awareness,
• disorientation,
• seizures, or
•  any involuntary movement or convulsion.
RESUME GAMEPLAY ONLY ON APPROVAL OF YOUR PHYSICIAN.

Use and handling of video games to reduce the likelihood of a seizure
•  Use in a well-lit area and keep as far away as possible from the television screen.
•  Avoid large screen televisions. Use the smallest television screen available.
•  Avoid prolonged use of the system. Take a 15-minute break during each hour of play.
•  Avoid playing when you are tired or need sleep.

Radio waves

Radio waves may affect electronic equipment or medical devices (for example, pacemakers), which may 
cause malfunctions and possible injuries.
•  If you use a pacemaker or other medical device, consult your physician or the manufacturer of your 

medical device before using the wireless networking feature.

•  Do not use the wireless networking feature in the following locations:

– Areas where wireless network use is prohibited, such as in hospitals. Abide by medical institution 

regulations when using the system on their premises.

– Areas near fire alarms, automatic doors and other types of automated equipment.

For customers in the U.S.A. and Canada

• NOTICE
  This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation.

  This equipment generates, uses and can radiate radio frequency energy and, if not installed and used 

in accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, which can be determined 
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or 
more of the following measures: 
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected.

– Consult the dealer or an experienced radio/TV technician for help. 

•  You are cautioned that any changes or modifi cations not expressly approved in this manual could void 

your authority to operate this equipment.

•  This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is subject to 

the following two conditions: (1) this device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference that may cause undesired operation of 
this device.

•  This transmitter must not be co-located or operated in conjunction with any other antenna or 

transmitter.

•  This equipment complies with FCC/IC radiation exposure limits set forth for uncontrolled equipment 

and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and 
RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and 
operated with at least 20cm and more between the radiator and person’s body (excluding extremities: 
hands, wrists, feet and legs).

If you have questions about this product, call our technical support line at 1-800-345-7669, 
or write to:
Sony Computer Entertainment America
Consumer Services/Technical Support
PO Box 5888, San Mateo, CA 94402-0888 U.S.A.

Declaration of Conformity

Trade Name : 

SONY

Model No. : 

DECHJ00A, DECHJ00AS, DECHSJ00A

Responsible Party :  Sony Electronics Inc.
Address : 

16530 Via Esprillo, San Diego, CA 92127 U.S.A.

Telephone No. : 

858-942-2230

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) this device may not cause harmful interference, and (2) this device must accept 
any interference received, including interference that may cause undesired operation.

•  The lithium coin memory back-up battery inside this product contains Perchlorate.
  The following statement is required by the State of California, USA:
  Perchlorate Material – special handling may apply. See 
 http://www.dtsc.ca.gov/hazardouswaste/perchlorate

For customers in Europe

•  This equipment has been tested and found to comply with the limits set out in the R&TTE Directive using 

a connection cable shorter than 3 metres. Do not use cables longer than 3 metres.

Where you see this symbol on any of our electrical products/packaging in Europe, it means that at end of 
life the product/battery must be disposed of in accordance with any applicable laws or requirements for the 
separate disposal of electrical equipment/batteries. Accordingly at end of life we will arrange for separate 
disposal of our loan equipment including without limitation development kits which remain at all times the 
property of Sony Computer Entertainment Europe. If you would like assistance with the disposal of any 
other electrical products which we have supplied to you for business use, we can arrange a take-back 
service on request. Please check http://www.devtoolrec.scee.net for more information.

This product contains a battery which is permanently built-in for safety, performance or data integrity 
reasons. The battery should not need to be replaced during the lifetime of the product and should only be 
removed by skilled service personnel. To ensure the correct waste treatment of the battery, please dispose 
of this product as electrical waste.

The manufacturer of this product is Sony Computer Entertainment Inc., 2-6-21 Minami-Aoyama, Minato-ku 
Tokyo, 107-0062 Japan. The Authorised Representative for EMC and product safety is Sony Deutschland 
GmbH, Hedelfi nger Strasse 61, 70327 Stuttgart, Germany.
Distributed in Europe by Sony Computer Entertainment Europe Ltd, 10 Great Marlborough Street, London, 
W1F 7LP.

For customers in the United Kingdom

A molded plug complying with BS1363 is fi tted to this equipment for your safety and convenience. Should 
the fuse in the plug supplied need to be replaced, a 3AMP fuse approved by ASTA or BSI to BS1362, (i.e., 
marked with 

 or  ) must be used. If the plug supplied with this equipment has a detachable fuse cover, 

be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If 
you should lose the fuse cover, please contact your nearest Sony service station.

Precautions

Safety

This product has been designed with the highest concern for safety. However, any electrical 
device, if used improperly, has the potential for causing fi re, electrical shock or personal injury. 
To help ensure accident-free operation, follow these guidelines:
•  Observe all warnings, precautions and instructions.
•  Regularly inspect the AC power cord for damage.
•  Stop use, unplug the AC power cord from the electrical outlet and disconnect any other 

cables immediately if the device functions in an abnormal manner, produces unusual sounds 
or smells or becomes too hot to touch.

Use and handling

•  Do not connect cables other than a USB cable while the AC power cord is plugged into the 

electrical outlet.

•  Do not touch the system or connected cables or accessories during an electrical storm.
•  Do not use the system or accessories near water.
•  Do not allow liquid, small particles or other foreign objects to get into the system or 

accessories.

•  Do not touch the connectors of the system or accessories.
•  Do not expose the system or accessories to dust, smoke or steam. Also, do not place the 

system in an area subject to excessive dust or cigarette smoke. Dust build-up or cigarette 
smoke residue on the internal components (such as the lens) may cause the system to 
malfunction.

•  Do not expose the system or accessories to high temperatures, high humidity or direct 

sunlight.

•  Do not place the system or accessories on surfaces that are unstable, tilted or subject to 

vibration.

•  Do not set the system other than in the vertical or horizontal position. Also, do not change 

the position while the system is turned on.

•  Be careful when carrying the system. If you do not have a good grip, the system may drop 

causing potential damage or injury.

•  Do not move or change the position of the system with a disc inserted. The vibration may 

result in scratching of the disc or the system.

•  Do not stand on or put objects on the system, and do not stack the system with other 

devices.

•  Do not place the system and connected accessories on the fl oor or in a place where they 

may cause someone to trip or stumble.

•  Do not allow bodily contact with the system or air from the system vents for an extended 

period of time while in use. Extended contact under these conditions may cause low-
temperature burns.

•  When connecting the system to a plasma or projection* TV, do not leave a still image on the 

TV screen for an extended period of time, as this may leave a faint image permanently on 
the screen.

  * Except LCD screen types
•  When using the motion sensor function of the wireless controller, be cautious of the following 

points. If the controller hits a person or object, this may cause accidental injury or damage.
–  Before using, check that there is plenty of space around you.
–  When using the controller, grip it firmly to make sure it cannot slip out of your hand.
– If using a controller that is connected to the debugging station with a USB cable, make 

sure there is enough space for the cable so that the cable will not hit a person or object. 
Also, take care to avoid pulling the cable out of the debugging station while using the 
controller.

Vents

Do not block any vents. To maintain good ventilation, follow the guidelines below:
•  Place the system at least 10 cm (4 in) away from a wall surface.
•  Do not place on a carpet or rug with long fi bers.
•  Do not place in a narrow or cramped space.
•  Do not cover with cloth.
•  Do not allow dust to build up on the vents.

Reviews: