Sony BRAVIA XR-65X95K Original Manual Download

Page: 1 / 36

9-888-904-42

LCD TV

Sony EMCS (Malaysia) Sdn. Bhd., HES-M

ORIGINAL MANUAL ISSUE DATE: 2022.05

Conditions of Use:
(1) Please use this information only for the purpose of performing repair and recycling Sony products. Using this information

for any purpose other than the purpose described foregoing is forbidden.

(2) Do not copy, replicate, reproduce, alter, translate, transmit, sell, lease, or distribute this information in whole or in part

without the prior written permission of the author.

Revision of Information:
This information may be changed or updated at any time without any prior notice. Please confirm that this information is up-to-
date before using it.

Dismantling Information forUse

by ProfessionalRecyclers

Model:

XR-65X95K

XR-75X95K

XR-85X95K

Summary of Contents for BRAVIA XR-65X95K





































Search results

Summary of Contents for BRAVIA XR-65X95K

Reviews:

Related manuals for BRAVIA XR-65X95K

Brands by name

Popular brands

Sony BRAVIA XR-65X95K, Original Manual

Search results

Summary of Contents for BRAVIA XR-65X95K

Reviews:

Related manuals for BRAVIA XR-65X95K

Brands by name

Popular brands