![background image](http://html.mh-extra.com/html/sonance/ls15sub/ls15sub_instruction-manual_1319854001.webp)
1
I N S T R U C T I O N M A N U A L
SLS
HIGH
OUTPUT
LS15SUB IN-GROUND SUBWOOFER
Introduction
Thank you for purchasing a
SLS
HIGH
OUTPUT Subwoofer. When
properly installed, the subwoofer will provide you with years of
outdoor entertainment pleasure. To get the most out of your new
subwoofer, please read this manual thoroughly before you begin
installation.
Box Contents
SLS HIGH
OUTPUT In-Ground Subwoofer box contains:
(1) In-ground subwoofer
(1) Dark brown canopy with ABS tube
(1) Rubber elbow
(2) Stainless steel hose clamps
(2) Silicon filled wire nuts
Subwoofer Location Selection
The Sonance Landscape Series is designed to deliver a seamless,
evenly dispersed sound field in an ‘open air’ environment. An array
of multiple satellite speakers and subwoofers should be strategically
placed to minimize ‘hot spots’ and ‘nulls’ as you move around the
outdoor entertainment area. See Figure 1.
As a general guideline, (1) subwoofer will cover about
2000 square feet of listening area
Figure 1 shows the
SLS HIGH
OUTPUT placed along the perimeter
of the entertainment area.
Select a central location for the subwoofer if using only one subwoofer
(see figure 1) if using multiple subwoofers, select locations that are
the same distance from the main listening area.
Amplifier Power Planning
The maximum number of satellites and subwoofers that can be
used in a system will depend on the quantity of amplifier power
available.
Before beginning an installation use the chart below to calculate
the amplifier power your installation will require. Multiple
amplifiers may be required in large installations.
Wattage Calculator
Amplifier Selection
Description
In-Ground Subwoofer
Dimensions
20.00”L x 14.00” Dia.
Enclosure
Non-corrosive 1/2“ Thk. (HDPE)
Speaker Sizes
12.00” Dia.
Frequency Response
40Hz-100Hz
Listening Area
2000 sq. ft. omnidirectional
Speaker Input
70.7 volt / 20 watt
Weight 54 lbs.
1/2” Thk. (HDPE) Sealed Enclosure
Front firing Band-pass Design
Vertically Mounted 12” Woofer
Tuned Port / Deep,powerful, tight bass
Copper-Wound 70.7V Transformer
Professional-Grade Electronics
SONANCE
LANDSCAPE SERIES
LS10SUB In-Ground Subwoofer
Sonance
212 Avenida Fabricante
San Clemente, CA 92672-7531 USA
800.582.7777
sonance.com
©2010 Sonance, All Rights
Reserved. Sonance is a registered trademark of Dana Innovations.
16.00"
14.00"
4.0"
17.625"
4.0"
9.50"
For systems up to 500w per channel use the CROWN CDI 1000
For systems up to 800w per channel use the CROWN CDI 2000
For systems up to 1000w per channel use the CROWN CDI 4000
LS15SUB Subwoofer
Patent Pending
Figure 1
Subwoofer
Model
Qty.
Ch.1
Qty.
Ch.2
x
Watts
Total
Ch.1
Total
Ch.2
LS87SAT
x
50
LS15SUB*
x
400
Sub Total
20% Head
Room
TOTAL WATTAGE
*The LS15SUB is a dual voice coil, single-stereo subwoofer. Each
voice coil draws 200 watts, for a combined total of 400 watts.
The LS15SUB requires a 4-conductor wire to connect both it’s
left and right channel inputs.