Instructions for Firmware
Upgrade to Version 2.1.5 AKL
September 2017
1
APRC Remote Control
Instructions for Firmware Update to Version 2.1.5
REQUIREMENTS
1.
Download firmware version 2.1.5 for the remote control from the Pluggit website:
2.
Check compatibility between the firmware of your air handling unit and the firmware of your
remote control.
All components shown in the following table are compatible with firmware version 2.1.5.
Firmware of Air
Handling Unit
PC-Software
APPs
Firmware
Version 268
for
AP190
AP310
AP460
AD160
iFlow II
2.13.74
und
2.12.67
IOS 2.02.30
AS 20.41 ipa
UPGRADING THE FIRMWARE
1.
Remove batteries from the remote control.
On the inside of the remote control you will find a micro-USB slot. It is located above the
battery compartment.
2.
Connect remote control to your computer with a micro-USB cable.
3.
Find the small hole on the back of the remote. A small push button is located inside the hole.
4.
Use a pin or similar object to press the push button for 5 seconds.
The file folder of the remote control will open on your computer. It contains a BIN file
named firmware.bin.
5.
Delete firmware.bin.
