OT Series LED Area Light
Type D Slide & Lock Mount for Square/Round Pole
Installation Instruction Manual
Read these instructions completely and carefully. Save these instructions for future use.
• To avoid the possibility of electric shock, turn off power supply before installation or servicing.
Installation and servicing should be performed by qualified technician.
• Before closing cover of fixture, make sure all wires are inside fixture housing to avoid pinching
wires.
• Fixture must be installed in accordance with NEC or local electrical codes.
• For protection, install/service technician should always wear protective goggles and gloves
during the installation and maintenance.
• SolarMax LED is not responsible for any damages caused by parts/components that are not
supplied by SolarMax LED.
Before proceeding with installation or service maintenance of this product:
Secure the luminaire bracket to OT Area
Light by tightening 4 M8 socket head bolts.
STEP 1
Secure the luminaire bracket to OT Area
Light by tightening 4 M8 socket head bolts.
STEP 2
Slide the luminaire bracket into pole
bracket. Tighten 2 M4 socket head bolts
to secure the bracket system.
STEP 3
SolarMax LED | 3080 12th St., Riverside, CA 92507 | (951) 300-0788 | [email protected]
(4) M8 socket
head bolts
(2) M8 socket
head bolts
(2) M4 socket
head bolts
