Solara Field Tracker 2100 User Guide
Turning On the FT2100
To turn on your FT2100, push the On/Off toggle switch on the right side of the unit upward to
the "On" position.
The FT2100 will show the Solara logo on the display, then the main screen. As the GPS is
activated, a line reporting the number of GPS satellites heard will appear.
Automatic Tracking with the FT2100 (Commence & End Grooming Operation)
*When the power switch is on the FT2100 is automatically tracking. The FT2100 will
automatically transmit a GPS position over the system and then turn off the screen as it goes
into power save sleep mode. The FT2100 will turn off the screen automatically and go into
power save sleep mode. You will see the green light flash about every 3 seconds once it is in
this mode. The FT2100 will automatically wake up at the programmed time to send the next
position report. In order to save power, the FT2100 does not turn on the screen when doing
routine position reports.
*At the end of grooming operations for the day press the “Send” followed by any number
key to send a complete grooming message, once message had been sent turn the unit off via
the toggle switch.
